Garage Essentials PDF Free Download
1 / 108/108
100%
MARCH - SEPTEMBER 2024 ISSUE 50
All the equipment you need
Air Con Cooling Battery Support Diagnostics Li fts Tools and more...
50TH
EDITION
All the equipment you need
For more information call:
0330 041 2118 The UK’s fastest growing
network of garages
Local Service National Strength
Are you interested
in joining the UK’s
fastest growing
network of independent
garages?
Our Servicesure Autocentres programme
has been created with input from garage
owners who run workshops and garages
just like yours.
It’s been specically designed to identify service and
repair opportunities to help your business grow.
We also oer a range of exclusive business support
services that will save you time and money.
As a member of Servicesure Autocentres you have
access to a wide range of benets. Every Single one of
them has been added to the programme to help your
business prosper. Some of the benets will help you generate
more revenue or provide a better service whilst others could
save you money.
You can choose to use as many or as few of the benets as you
want and they can be started at any point of your membership.
» Access to our market
leading National Warranty
» Brakesure
» Batterysure
» EVsure
» GS Onestop
» GS Lite
» AlliCat
» Temporarytechnicalsta
» Interest Free credit
» Training
» Electric Vehicle Insurance
» Business Insurance opportunities
» Full marketing support service
» Branded clothing
» Sponsorship
» Brand Awareness through social media
» Waste Management
» Plus many more
Benets include:
The benets massively outweigh the subscription!
WHEEL & TYRE 42-46
TYRE CHANGERS & BALANCERS
WHEEL ALIGNMENT 47-48
LIFTING 49-58
HURRICAINE
SILENT TECHNOLOGY
WORKSHOP PRESS
TROLLEY, BOTTLE, TRANSMISSION JACKS
AXLE STANDS
MECHANICAL VEHICLE SKATES
SCISSOR, TWO, FOUR POST LIFTS
MOT BAYS 59-60
FULL ATL PACKAGES
MOT BAYS
EMISSIONS 61
GAS & SMOKE ANALYSERS
GENERAL WORKSHOP 62-70
HEATED DRYERS
PARTS CLEANING MACHINES
INDUCTION HEATERS
ENGINE & GEARBOX
COOLING SYSTEM DIAGNOSTIC
TYRE REPAIR
TRANSMISSIONS
ATF MACHINE
OIL DRAINERS
BOOT TOOLS
TRANSFER PUMPS
WELDING 71-73
WELDERS
CUTTER PACKS
HEATER KIT
PROTECTION
AIR CONDITIONING 7-15
0
The Ozone Generator
Part Number: CE98045C
Please read all of the information provided in this
owner’s manual before operating your new Ozone Generator.
Unit 9 Stanley Court, Edison Close, Waterwells Business Park Gloucester GL2 2AE
Tel: 01452 855552 Email:sales@coolingedge.co.uk
OWNER’S MANUAL
AIR CONDITIONING SERVICE STATIONS
CONSUMABLES
PURIFICATION TREATMENTS
LEAK DETECTIONS
ACCESSORY KITS
WORKSHOP & OFFICE COOLING UNITS
RAM AIR FANS
BATTERY SUPPORT 16-21
BATTERY CHARGING
BATTERY SUPPORT UNITS
BATTERY SUPPORT
BATTERY DIAGNOSTICS
BATTERY JUMP PACKS & BOOSTERS
DIAGNOSTICS 22-36
DIAGNOSTIC TERMS
POWERHAND DIGITAL MULTIMETER
POWERPROBE
SENSOR TEST LEAD KITS & ACCESSORIES
HEAVY DUTY PC'S & LAPTOPS
AUTEL PACKAGES
DELPHI ADVANCED DIAGNOSTIC SOLUTIONS
LAUNCH UK PACKAGES
HELLA PACKAGES
MAVERICK PACKAGES
BOSCH KTS PACKAGES
TEXA PACKAGES
TPMS
ELECTRICAL TESTING
ADAS CALIBRATION 37-41
WHAT IS ADAS?
ADAS BUNDLES
GSF Car Parts is one of the UK’s leading automotive parts distributors, supplying thousands of independent
garages throughout the UK with parts, tools, garage equipment and specialist training.
The new Garage Essentials is a special edition, being the 50th issue of our ever-popular garage equipment
and tools catalogue. Over the years thousands of garages have trusted GSF Car Parts to advise, supply and
support them in purchasing a wide array of capital equipment, tools, vehicle diagnostics, training and much
more.
This 50th edition features a huge choice of equipment from many of the most respected brands in the
industry. There’s also numerous new products included for the first time.
Our team of experts are on hand to answer any questions - contact them on 0121 749 8801 or
garage.equipment@gsfgroup.com
PRESSURE WASHERS 74-75
SUSPENSION 76
WORKSHOP LIGHTS 77-78
SERENCO
RECHARGABLE COMPACTS
HEAD TORCH
UNDERHOOD
FOLDING
HEALTH/SAFETY/SECURITY 79-80
WORKWEAR
FIRST AID
UNIFORM
FOLDING
SAFES
TOOL / TYRE STORAGE 81-86
STORAGE SYSTEMS
TYRE STORAGE SOLUTIONS
POWER TOOLS 87-95
TOOL KITS, GRINDERS, POWER PACKS, IMPACT
WRENCHES, POLISHERS & MANY MORE...
HAND TOOLS 96-102
SPECIALIST HAND TOOLS
SOCKETS & SPANNERS
GENERAL TOOLS
EV TOOLS & EV WORKSHOP
TRAINING 103-106
GSF APP 107
2
MEET THE TEAM 4
FIND YOUR LOCAL BRANCH 4
LEASING 6
WELCOME
3
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 3
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
For the most up to the minute
branch listing with full contact
details, log onto our website and
search by your postcode.
gsfgroup.com/our-locations
Accrington BB5 1QX 01254 239911
Andover SP10 4EY 01264 839999
Anglesey LL60 6HR 01248 422000
Ashford TN24 0TL 01233 502379
Aylesbury HP19 8RY 01296 737873
Banbury OX16 2RL 01295 221133
Barnstaple EX32 8QA 01271 375801
Basingstoke RG22 4AD 01256 710200
Belfast BT12 6HT 028 9066 3866
Beverley HU17 0GJ 01482 871771
Birmingham Castle Vale B35 7AR 0121 749 8815
Birmingham Halesowen B62 8HN 0121 561 3001
Birmingham Smethwick B66 1NU 0121 565 6340
Birmingham Solihull B90 4NZ 0121 221 3000
Blackburn BB1 3AR 01254 53463
Blackpool FY4 2RP 01253 843373
Boldon NE35 9LZ 0191 644 4789
Bournemouth BH8 8BH 01202 509459
Bradford Central BD4 7EA 01274 733888
Bridgend CF31 3TP 01656 649493
Bridlington YO16 4SJ 01262 400900
Brighton Hove BN3 7BA 01273 701777
Bristol Avonmouth BS11 9YE 0117 322 6799
Bristol Central Easton BS5 0SP 0117 955 7654
Bristol North Aztec West BS32 4RR 0117 322 4078
Bristol South Ashton Gate BS3 2LD 0117 338 0380
Bromsgrove B60 3DX 01527 575444
Burgess Hill RH15 9RD 01444 258831
Burnley BB11 4AA 01282 450005
Burton DE14 2WD 01283 500006
Bury BL9 6AQ 01617 614012
Caernarfon LL55 2BD 01286 673504
Camborne TR14 0PY 01209 220000
Cambridge CB4 2PF 01223 640999
Cannock WS11 7FJ 01543 431400
Cardi East CF24 1RF 02920 489150
Cardi South CF11 8BA 029 2034 7900
Carmarthen SA31 2BG 01267 237977
Castleford WF10 4SB 01977 558833
Chard TA20 2DA 01460 65051
Chelmsford CM2 6TG 01245 460460
Cheltenham North GL51 9NZ 01242 252100
Cheltenham South GL51 8PL 01242 225620
Chester CH1 4LT 01244 377118
Chichester PO19 7BJ 01243 771331
Chorley PR7 1NY 01257 233833
Clitheroe BB7 1QD 01200 425525
GSF Car Parts has over 180
branches nationwide. Our
network is expanding, with new
sites opening throughout 2024
and beyond, as we aim to supply
more garages with the parts
and service they need to be
successful.
Our team of Garage Equipment
specialists are available to help you
invest in the right equipment for your
business growth.
Simply call 0121 749 8801
or email us at
garage.equipment@gsfgroup.com.
POWER TOOLS
MEET THE GE TEAM BRANCHES
NATIONWIDE
4FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
4FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
Liverpool Bootle L5 9UB 0151 207 6667
Llandudno LL31 9PN 01492 592144
Llanelli SA14 8LQ 01554 775772
Luton LU1 3XJ 01582 506940
Macclesfield SK10 1LT 01625 427733
Maidstone ME15 6HA 01622 766410
Malvern WR14 1GF 01684 882699
Manchester Dukinfield SK16 4UP 01613 396500
Manchester Traord Park M17 1QR 0161 876 0466
Manchester Wythenshawe M22 4QE 0161 946 7929
Mansfield NG19 9BG 01623 594900
Merthyr CF48 4XA 01443 699002
Middlesbrough TS6 6RU 01642 386477
Milton Keynes MK1 1EQ 01908 872278
Neath SA10 7NH 01639 641118
Newcastle NE12 9SZ 0191 205 8313
Newport NP19 4SL 01633 280001
Newquay TR9 6TL 01637 849377
Northallerton DL6 2XE 01609 779551
Northampton NN1 2PN 01604 609080
Northwich CW9 7LU 01606 353200
Norwich NR6 6RA 01603 780900
Nottingham NG2 3GG 01159 503723
Oldham OL1 3PA 01616 268384
Otley LS21 3DT 01943 467514
Oxford Abingdon OX14 5JX 01235 550555
Oxford Cowley OX4 2RD 01865 972972
Park Royal NW10 6RJ 020 7717 5686
Penryn TR10 9EP 01326 372651
Peterborough PE1 5WS 01733 293444
Plymouth North PL7 1RF 01752 330011
Plymouth South PL4 0SF 01752 668931
Poole BH12 3PF 01202 741060
Porthmadog LL49 9NZ 01766 515414
Portsmouth PO3 6FH 02392 728970
Preston PR1 5DP 01772 281711
Reading RG2 0AU 01189 873030
Redditch B98 7SE 01527 520445
Rhyl LL18 2AB 01745 355505
Rochdale OL16 5RD 01706 678000
Romford RM11 2SJ 020 8598 8800
Ross-on-Wye HR9 7BW 01989 769921
Saltash PL12 6LD 01752 623203
Sheeld S9 5EX 01142 617888
Shrewsbury SY1 4YA 01743 440088
Sidcup DA14 5BL 020 8302 7624
Sittingbourne ME10 2PD 01795 402402
Colchester CO4 9XP 01206 203006
Coleford GL16 8PN 01594 832092
Coventry CV6 5RY 024 7666 9988
Crewe CW1 6AE 01270 214216
Croydon CR0 4TQ 0208 970 7734
Daventry NN11 8RB 01327 871009
Derby North DE1 3QB 01332 202802
Derby South DE1 2SX 01332 346680
Doncaster DN2 4NH 01302 762762
Dover CT16 3PT 01304 210712
Durham DH1 1TH 0191 336 1990
East Grinstead RH19 1XZ 01342 321456
Eastbourne BN22 8PW 01323 410817
Enfield EN3 7TY 0208 443 8090
Exeter EX2 8RG 01392 258279
Farnham GU9 9LQ 01252 333891
Frome BA11 4BG 01373 465961
Gateshead NE21 5TR 0191 204 9555
Gloucester North GL4 3SJ 01452 528800
Gloucester South GL2 5DH 01452 212212
Goole DN14 6XF 01405 658031
Harlow CM20 2GF 01279 342200
Harrogate HG1 4QE 01423 889021
Haslemere GU27 1DW 01428 654444
Hastings TN38 9BA 01424 435588
Haverfordwest SA62 4BR 01437 760428
Hayes UB3 1AP 0208 573 0033
Heathrow TW14 0LW 020 8917 3800
Hemel Hempstead HP3 9AJ 01442 868040
Henfield BN5 9DE 01273 495880
High Wycombe HP13 7EJ 01494 441234
Horsham RH12 2NW 01403 257325
Huddersfield HD2 1AG 01484 434333
Hull HU2 0JX 01482 328308
Ipswich IP1 5BN 01473 748166
Isle of Man IM1 5AT 01624 620000
Kidderminster DY11 7AR 01562 864333
Leamington Spa CV31 3LH 01926 451980
Leeds East LS8 5EL 0113 201 9030
Leeds South LS10 2AZ 0113 292 4999
Leeds West LS4 2AR 0113 244 3637
Leicester LE4 0JD 0116 234 0200
Letchworth SG6 1JF 01462 708800
Lewes BN7 2FB 01273 487828
Lincoln LN6 7QY 01522 575333
Littlehampton BN17 5DF 01903 719990
Liverpool Aintree L9 5AY 0151 525 1764
All our branches have excellent
availability of parts for all
makes and models, backed by
committed and knowledgeable
teams, on hand to provide the
expert advice and best-in-class
service that busy workshops
require.
BRANCHES
NATIONWIDE
5
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 5
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
Skipton BD23 2QR 01756 799500
Slough SL1 4QU 01753 215080
Southampton North SO50 4NT 023 8124 2636
Southampton West SO40 9LA 023 8086 3900
Southend SS2 5TE 01702 277 969
Southport PR8 5RG 01704 536446
St Helens WA9 5GZ 01744 649 510
Staples Corner NW2 7JA 0208 208 6444
Stoke ST4 1PU 01782 844395
Strood ME2 4LY 01634 712212
Sunderland SR2 9TP 01915 412 250
Swansea SA6 8JG 01792 790080
Swindon SN3 4NS 01793 836940
Sydenham SE26 5AQ 020 8314 4750
Taunton TA2 8RX 01823 259691
Telford TF7 4NZ 01952 581666
Thanet CT9 5TH 01843 298676
Thurrock RM20 3FH 01708 890740
Tiverton EX16 6SW 01884 256767
Torquay TQ2 7QL 01803 242400
Tottenham N17 7RQ 020 8104 8020
Tunbridge Wells TN2 3EH 01892 518028
Wakefield WF2 9LP 01924 851 899
Walsall WS2 9HQ 01922 432488
Warrington WA5 0LS 01925 669759
Watford North WD24 5RR 01923 239039
Watford South WD18 7EN 01923 229255
Welling DA16 3DP 020 8317 7774
Welwyn Garden City AL7 1EW 01707 429 870
Wembley HA9 7NE 020 3280 6688
Weston-Super-Mare BS24 9ES 01934 886544
Weymouth DT3 4FL 01305 360875
Widnes WA8 8FZ 0151 424 5056
Wigan WN1 3DG 01942 502 844
Wirral CH43 3DS 0151 676 0959
Wolverhampton WV2 2HU 01902 350940
Woodford IG8 8HF 020 3280 2611
Worcester WR4 9GN 01905 29990
Worthing BN14 8PQ 01903 823123
Wrexham LL11 4YL 01978 365392
Yeovil BA22 8XG 01935 609 955
York YO30 4US 01904 829239
SPOTLIGHT ON SERVICESURE
CALL OUR TEAM ON 0121 749 8801
FOR MORE INFORMATION
FINELY TUNED FINANCE
www.kennet-leasing.co.uk
Kennet Equipment Leasing Limited. Kennet House, Temple Court, Temple Way, Coleshill, Birmingham B46 1HH.
T: 01675 469200 F: 01675 469210
Kennet Equipment Leasing Limited is regulated by the FCA for the purposes of agreements governed by the Consumer
Act 1974. FRN 676024. *Finance subject to status and credit checks.
WHY YOU SHOULD LEASE
• fast nance approval*
• no large deposit to nd
• payments remain the same
throughout
• tax advantages to leasing
• no need to use cash, overdrafts
or loans
• new starts and sole trader
businesses can lease
• no security on your property
• new or used equipment from
£1,000 in value
INTERESTED IN KNOWING MORE ABOUT LEASING?
Simply call Tony Devenney at Kennet Equipment Leasing on 01675 469208 or email
tony@kennet-leasing.co.uk
Have the best equipment for your business,
not the cheapest.
Kennet Equipment Leasing is one of the UK’s
leading equipment finance suppliers. We are
dedicated to providing leasing solutions that fit
your requirements perfectly.
More and more companies understand that
having new equipment via a finance package
really does allow their business to grow.
Kennet can offer you fast decisions, solid
advice and the continuity of service you would
expect from an award-winning leasing
specialist that has been working with garages
since 1990.
FINELY TUNED FINANCE
www.kennet-leasing.co.uk
Kennet Equipment Leasing Limited. Kennet House, Temple Court, Temple Way, Coleshill, Birmingham B46 1HH.
T: 01675 469200 F: 01675 469210
Kennet Equipment Leasing Limited is regulated by the FCA for the purposes of agreements governed by the Consumer
Act 1974. FRN 676024. *Finance subject to status and credit checks.
WHY YOU SHOULD LEASE
• fast nance approval*
• no large deposit to nd
• payments remain the same
throughout
• tax advantages to leasing
• no need to use cash, overdrafts
or loans
• new starts and sole trader
businesses can lease
• no security on your property
• new or used equipment from
£1,000 in value
INTERESTED IN KNOWING MORE ABOUT LEASING?
Simply call Tony Devenney at Kennet Equipment Leasing on 01675 469208 or email
tony@kennet-leasing.co.uk
Have the best equipment for your business,
not the cheapest.
Kennet Equipment Leasing is one of the UK’s
leading equipment finance suppliers. We are
dedicated to providing leasing solutions that fit
your requirements perfectly.
More and more companies understand that
having new equipment via a finance package
really does allow their business to grow.
Kennet can offer you fast decisions, solid
advice and the continuity of service you would
expect from an award-winning leasing
specialist that has been working with garages
since 1990.
WHEEL ALIGNMENT SYSTEM
Kennet Equipment Leasing is one of the UK’s leading equipment finance
suppliers. We are dedicated to providing leasing solutions that fit your
requirements perfectly.
WHY YOU SHOULD LEASE
• Fast finance approval
• No large deposit to find
• Payments remain the same throughout
• Tax advantages to leasing
• No need to use cash, overdrafts or loans
• New starts and sole trader businesses can lease
• No security on your property
• New or used equipment from £1,000 in value
Finance examples quoted are based on a 5 year term and based on a company trading 3 years (finance can be oered to companies
trading less than 3 years). All quotes are subject to status, terms and conditions and aordability checks apply. Payments will
be collected Monthly and not weekly, Other finance options are available. GSF Car Parts Limited is an Introducer Appointed
Representative of Kennet Equipment Leasing Limited. Kennet Equipment Leasing Limited is authorised and regulated by the FCA,
FRN:676024, authorised for credit broking and lending. Kennet work with a panel of lenders. GSF/MAG/04.1.23 V1
For Illustrations purposes
Terms and conditions may vary dependent on credit rating
ADAS MACHINE
FINELY
TUNED
FINANCE
CALL NOW FOR YOUR
TAILORED FINANCE SOLUTION
CALL NOW FOR YOUR
TAILORED FINANCE SOLUTION
7
AIR CONDITIONING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 7
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
DESIGNED AND MANUFACTURED BY COOLING EDGE
EVO - TEC R1234YF
AIR CONDITIONING SERVICE STATION
PART NO: CE92009EV2
• Fully automatic machine comprehensive vehicle database
• 10 Kg refrigerant cylinder
• 100mm easy read gauges
• Automatic recovery i vacuum/ charge automatic oil discharge with
scale fully automatic oil/ dye with scale 100 l / min vacuum pump
• 400 G per min recovery pump counters for machine servicing
thermal printer
• 5.1 Graphic display
• 3 Mtr hose length
• Easy to use rotary switch function back lit alarm system
• Fully automatic oil/dye with scale
• 100l/min vacuum pump
• 400g per min recovery pump
• Counters for machine servicing
• Thermal printer
• 5.1 Graphic display
• 3mtr hose length
• Easy to use rotary switch function
• Back lit alarm system
DESIGNED AND MANUFACTURED BY COOLING EDGE
EVO - TEC R134A
AIR CONDITIONING SERVICE STATION
PART NO: CE92006EV1
• Fully automatic machine comprehensive vehicle database
• 10 Kg refrigerant cylinder
• 100mm easy read gauges
• Automatic recovery/ vacuum/ charge automatic oil discharge with
scale fully automatic oil / dye with scale 100 l / min vacuum pump
• 400 G per min recovery pump counters for machine servicing
thermal printer
• 5.1 Graphic display
• 3 Mtr hose length
• Easy to use rotary switch function back lit alarm system
• Fully automatic oil/dye with scale
• 100L/ min vacuum pump
• 400G per min recovery pump
• Counters for machine servicing
• Thermal printer
• 5.1 Graphic display
• 3Mtr hose length
• Easy to use rotary switch function
• Back Lit Alarm System
NEW
NEW
STARTER PACK
PART NO: CEACC3KNGEV2
£90
DIAGNOSTIC PACK
PART NO: CEACC4KEV2
£170
EVO TEC
TWIN PACK
PART NO: CE92006T3
£4,099
STARTER
PACK
PART NO: CEACC5KEV1
£121
DIAGNOSTIC
PACK
PART NO: CEACC6KEV1
£175
PRICE FROM
£2,399
FINANCE OPTIONS
AVAILABLE
Subject to Machine
service after
year 1 & 2
G
U
A
R
A
N
T
E
E
S
A
T
I
S
F
A
C
T
I
O
N
3 YEAR
Subject to Machine
service after
year 1 & 2
G
U
A
R
A
N
T
E
E
S
A
T
I
S
F
A
C
T
I
O
N
3 YEAR
PRICE FROM
£2,199
FINANCE OPTIONS
AVAILABLE
8
AIR CONDITIONING
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
AIR CONDITIONING
8FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
8FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
COOLING EDGE
ARENA R134A
AIR CONDITIONING SERVICE STATION
PART NO: CE92006AL
• Comprehensive Automotive Database
12 Ltr Refrigerant Cylinder
• 3 Metre Hoses
• Easy Read Pressure Gauges Automatic
Recovery/ Vacuum/ Charge Automatic
Oil Discharge
• Fully Automatic Oil/ Dye Injection
• 170 L / Min Vacuum Pump
The above price is for Arena machines with FREE
overnight delivery.
Delivery/ Commissioning and 1 F Gas Training is
available. Cost for 1 person £220 + VAT
Additional candidate training available upon on
request.
COOLING EDGE
ARENA R1234YF
AIR CONDITIONING SERVICE STATION
PART NO: CE92009AL
• Comprehensive Automotive Database
12 Ltr Refrigerant Cylinder
• 3 Metre Hoses
• Easy Read Pressure Gauges Automatic
Recovery/ Vacuum/ Charge Automatic
Oil Discharge
• Fully Automatic Oil/ Dye Injection
• 170 L / Min Vacuum Pump
• 280 G per Min Recovery Pump
STARTER PACK
PART NO: CEACC5K
£121
DIAGNOSTIC PACK
PART NO: CEACC6K
£175
STARTER PACK
PART NO: CEACC3K
£580
DIAGNOSTIC PACK
PART NO: CEACC4K
£175
ARENA TWIN PACK
PART NO: CE92006T2
£3,780
High Spec,
Low Price
PRICE FROM
£2,050
FINANCE OPTIONS
AVAILABLE
PRICE FROM
£1,999
FINANCE OPTIONS
AVAILABLE
9
AIR CONDITIONING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
AIR CONDITIONING
9
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
COOLING EDGE
MAC 2 R1234YF
FULLY AUTOMATIC MACHINE
PART NO: CE92006MAC2
COOLING EDGE
ECO DRAIN
MACHINE R134A
PART NO: CE92006ECO
COOLING EDGE
MAC 1 R134A
FULLY AUTOMATIC MACHINE
PART NO: CE92006MAC1
Latest
Technology
Ideal For Mobile
Use
Ideal For Mobile
Use
Ideal For Mobile
Use
COOLING EDGE
PICCOLA R744 CO2
FULLY AUTOMATIC MACHINE
PART NO: CE92006CO2
• Comprehensive agricultural /
automotive database
• 6 Kg refrigerant cylinder 5 Metre
hoses
• Easy read pressure gauges
• Automatic recovery / vacuum/
charge Automatic oil dischargefully
automatic oil/ dye injection
• 100 L/ min vacuum pump 400 G
per min recovery pump
• Counters for machine servicing
• Thermal printer Automatic oil
discharge Heater Belt
• Comprehensive agricultural/ automotive database
• 6 Kg refrigerant cylinder 5 Metre hoses
• Easy read pressure gauges
• Automatic recovery / vacuum/ charge Automatic oil discharge Fully
automatic oil/ dye injection
• 100 L/ min vacuum pump 400 G per min recovery pump
• Counters for machine servicing
• Thermal printer
• Heater Belt
HYBRID-READ Auto-Clean function
for hybrid and electric vehicles.
• 7" touchscreen display.
• Fully automatic unit:
- Automatic LOW and HIGH valves.:
- Automatic discharge with quantification.:
- Automatic VacuumNacuum test.:
- Automatic oil discharge (with scale).:
- Automatic charge of PAG, POE and UV oils.:
- Automatic refrigerant charge.:
- Automatic personalized cycle (discharge-vacuum- charge).:
- Flushing cycle.
• Ideal for vehicle dismantlers 10 Kg refrigerant cylinder
• 3 Metre hoses
• Easy read pressure gauges Automatic recovery shut o
Manual oil drain
• 400 G per min recovery pump
PRICE FROM
£2,299
FINANCE OPTIONS
AVAILABLE
PRICE FROM
£2,349
FINANCE OPTIONS
AVAILABLE
PRICE FROM
£5,100
FINANCE OPTIONS
AVAILABLE
PRICE FROM
£2,150
FINANCE OPTIONS
AVAILABLE
10 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
AIR CONDITIONING
10 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
TEXA
705R R134 MACHINE
SEMI AUTOMATIC MACHINE
PART NO: UKA6001
TEXA
707R R1234YF
FULLY AUTOMATIC MACHINE
PART NO: UKA6011
Entry Level
£2,850
FINANCE OPTIONS
AVAILABLE
£2,265
FINANCE OPTIONS
AVAILABLE
£1,895
FINANCE OPTIONS
AVAILABLE
• Compatible with R134a
• High visibility LCD screen
• Database and service management by SD card
• 10 kg tank
• Single stage vacuum pump
• Automatic oil injection (timed function)
• Compatible with R1234yf
• High visibility 7” Ouch Screen Panel
• Built In Database
• 10 kg tank
• Dual stage vacuum pump
• Automatic oil injection (timed function)
• Wifi Connectivity
TEXA
712R R1234YF
FULLY AUTOMATIC MACHINE
PART NO: UKA6811
• Two Gas Ready (134/1234 Option)
• High visibility 7” Ouch Screen Panel
• Built In Database
• 10 kg tank
• Dual stage vacuum pump
• Electronic Refrigerant Scales
• Wifi Connectivity
P
A
R
T
S
W
A
R
R
A
N
T
Y
2
YEAR
W
A
R
R
A
N
T
Y
2 YEAR
W
A
R
R
A
N
T
Y
2 YEAR
P
A
R
T
S
W
A
R
R
A
N
T
Y
2
YEAR
P
A
R
T
S
W
A
R
R
A
N
T
Y
2
YEAR
11
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
AIR CONDITIONING
11
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
CONSUMABLES
EV Compatible
Top Of
The Range
TEXA
780R BI-GAS TOUCH
FULLY AUTOMATIC MACHINE
PART NO: UKA2200
£5,460
FINANCE OPTIONS
AVAILABLE
£4,145
FINANCE OPTIONS
AVAILABLE
COOLING EDGE
MRL 85
UNIVERSAL
OIL/UV DYE
CTR KHEOS
PLUS
PART NO: CE91067BCTR
COOLING EDGE
R1234YF/HYBRID/
R134A UV DYE CTR
125ML
PART NO: CE91067CTR
NEW Best Seller
£14
COOLING EDGE
MRL 85
UNIVERSAL OIL
CTR ASTRA
260ML
PART NO: CE98029MLCTR
£18
£21
• Dual refrigerant management R134a and R1234yf
• Fully automatic service management
• Hybrid vehicle compatible
• Flushing system for refrigerant change
• Flushing system for oil change
• Printout of completed services via Wi-Fi
• 10” touchscreen display
• 2 x 12 kg tanks
TEXA
760R TOUCH
FULLY AUTOMATIC MACHINE
PART NO: UKA2100
• R134a and R1234yf compatible
• Fully automatic service management
• Refrigerant quantity measurement with electronic scales
• Automatic oil management with electronic scales
• EV vehicle compatible
• Flushing system for oil change
• Printout of completed services via Wi-Fi
• 10” touchscreen display
• 20 kg tank for Konfort 760 Touch
EV Compatible
• Kheos Plus,
Kristal Base and
Arena machines
W
A
R
R
A
N
T
Y
2 YEAR
W
A
R
R
A
N
T
Y
2 YEAR
P
A
R
T
S
W
A
R
R
A
N
T
Y
2
YEAR
P
A
R
T
S
W
A
R
R
A
N
T
Y
2
YEAR
12
AIR CONDITIONING
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
12 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
COOLING EDGE
POE/UV DYE
500ML BAG
PART NO: CE91067BAG
£25
150ML BAG
PART NO: CE91067BAG1
£17
• Suitable for
Hybrid/
Electric/ Stop Start
R134A / R1234YF
• Exclusive to
Evo - Tee
Machines
COOLING EDGE
EXTREME
LEAK STOP
R134A/
R1234YF/
HYBRID
PACK OF 6
PART NO: CE92555EC6
Buy Bulk
& Save
NEW COOLING EDGE
BRILLIANT R1234YF/
HYBRID/ R134A UV DYE
PART NO: CE91067H
£24
£80
COOLING EDGE
EXTREME
LEAK STOP
R134A/
R1234YF/
HYBRID
PART NO: CE92555EC
COOLING EDGE
TOTAL CARE
KIT VANILLA
PART NO:CE91100VTC1
NEW
£32
COOLING EDGE
POE UNIVERSAL
OIL
1LTR
PART NO: CE98029ML
£23 £23
COOLING EDGE
POE UNIVERSAL
OIL/UV DYE
1LTR
PART NO: CE91067ML
COOLING EDGE
TOTAL CARE
KIT TALC
PART NO: CE91100TC1
COOLING EDGE
TOTAL CARE
KIT LEMON
PART NO: CE91100LTC1
NEWNEWNEW
COOLING EDGE
SMOKI
SANITISER
1LTR
PART NO:CE91101S
COOLING EDGE
WOFFI
SANITISER
1LTR
PART NO: CE91101W
NEWNEW
COOLING EDGE
OZONE
GENERATOR
MACHINE
PART NO:
CE98045C
Best Seller
• WOOFI is a special chemical
product formulated to eliminate
the smell of pets from interiors
and surfaces. WOOFI doesn`t
cover up the smell but
irreversibly absorbs it.
• SMOKIis a special chemical
product formulated to eliminate
cigarette and tobacco odor
from interiors and surfaces.
SMOKIdoesn’t cover up the
smell but irreversibly absorbs it.
• TOTAL CARE is the
purifying treatment
developed to
thoroughly sanitise
air conditioning
systems and all
vehicle cockpit
surfaces, leaving
a pleasant clean
feeling.
• TOTAL CARE is the
purifying treatment
developed to
thoroughly sanitise
air conditioning
systems and all
vehicle cockpit
surfaces, leaving
a pleasant clean
feeling.
• TOTAL CARE
is the purifying
treatment
developed to
thoroughly
sanitise air
conditioning
systems and all
vehicle cockpit
surfaces, leaving
a pleasant clean
feeling.
£203
£13
£19
£13
£19
£13
• Suitable for Hybrid/
Electric/ Stop Start
R134A / R1234YF
• Suitable for Hybrid/
Electric/ Stop Start
R134A / R1234YF
CONSUMABLES
PURIFYING TREATMENTS
13
AIR CONDITIONING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
LEAK DETECTION
13
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
NEW
COOLING EDGE
LEAK
DETECTOR
FOR R134A /
R1234YF
PART NO: CE91098CH
NEW
NEW
COOLING EDGE
PRESSURE
TEST KIT
FOR R134A /
R1234YF
PART NO: CE93027
£129
NEW
COOLING EDGE
LEAK
DETECTOR
FOR R134A /
R1234YF /
NITRACE
PART NO: CE91098YF
£308
£214 £203
NEW
COOLING EDGE
NITRO TRACE KIT 10BAR
WITH LEAK DETECTOR
PART NO: CE93027NT3
£453
COOLING EDGE
R134A
MANIFOLD
WITH COUPLINGS
PART NO: CE93007
NEW
COOLING EDGE
R1234YF
MANIFOLD
WITH COUPLINGS
PART NO: CE93007C
NEW
COOLING EDGE
NITRO TRACE
CYLINDER
1LTR
PART NO: CE93027DN
£30
NEW
COOLING EDGE
NITRO TRACE
CYLINDER
2.2LTR
PART NO: CE93027DN1
£39
NEW NEW
COOLING EDGE
PRESSURE
TEST GAUGE
R1223YF
PART NO: CE93015A
£55
NEW
COOLING EDGE
PRESSURE
TEST GAUGE
R134A
PART NO: CE93015
£55 £32
COOLING EDGE
UV TORCH
WITH GOGGLE
PART NO: CE91072CH
£213
14
AIR CONDITIONING
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
14 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
COOLING EDGE
EXTENSION/
BOTTLE
ADAPTOR KIT
PART NO: CE93045K
COOLING EDGE
UNIVERSAL
DUST CORE
/CAP KIT
PART NO: CE51997
COOLING EDGE
VALVE CORE KIT
HFO1234YF
PART NO: CE51998YF
COOLING EDGE
VALVE CORE KIT
PART NO: CE51998H
COOLING EDGE
UNIVERSAL O RING KIT
AUTOMOTIVE
PART NO: CE54019
Great Value
Best Seller
• A selection valve
cores and
remover
• A selection
valve cores
and remover
for R1234YF
• Universal A/C
system O Ring
Kit
£26
£252
£57 £65
£57
£203
SIP
DEHUMIDIFIER
20LTR
PART NO: 05648
• 20ltr per day water extraction; 6.5ltr water tank with handle
DEHUMIDIFYING adjustable humidity levels, digital adjustable
relative humidity percentages between 30% and 80%
AUTOMATIC dehumidifier monitors conditions, adjusts to default
DRY CLOTHES optimal setting for drying large a range of garments
TIMER used to set specific dehumidifying sessions
FAN versatile 2-speed fan adjustment for all comfort levels
DEFROST for colder-than-normal rooms and a variety of spaces
AIR CLEAN perfect for removing odours, smells, and stale air
• Quality compressor with environmentally-friendly R290 refrigerant
• 3 cloud humidity indicators; blue (low), green (mid), and red (high)
£324
SIP
MOBILE AIR
CONDITIONING
UNIT
WITH 5 OPERATING
MODES
PART NO: 05647
Mobile air conditioning unit with 5 modes.
AUTO MODE the unit will automatically select Cool, Heat, or Fan
dependent upon the default settings
DRY MODE constant temperature dehumidifying setting
COOL MODE air cooling setting with adjustable target temperature;
versatile 10,000BTU/hr (2.9kW) down to 15°C
HEAT MODE adjustable heat; 8000BTU/hr (2.3kW) up to 31°C
FAN 2-speed fan cooling without refrigerant compressor
ACCESSORY KITS
WORKSHOP COOLING
15
AIR CONDITIONING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 15
RAM AIR FANS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 15
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 15
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
SIP
30" FLOOR STANDING DRUM FAN
PART NO: 05636
£299
£78
SIP
20" HEAVY-DUTY FLOOR FAN
PART NO: 05613
• 230v (13A) input supply
• Heavy-duty 315w fan motor
• 30” diameter free-standing fan
• 2-speed: 880rpm and 960rpm
• Swivel fan drum for directional air
• Ventilation of odours and fumes
• Air circulation keeps the air fresh
• Ideal for most drying applications
• Lightweight for easy positioning
• Relative 84dB(A) low noise level
• Cost-saving and high eciency
• Fully ErP-compliant
• 230v (13A) input supply
• Powerful 111w (0.14hp) motor
• 20” diameter free-standing fan
• 3-speed: 850 / 1100 / 1350rpm
• Ventilation of odours and fumes
• Air circulation keeps the air fresh
• Ideal for most drying applications
• Lightweight for easy positioning
• Delivers powerful, variable speed airflow to help cool spaces and
freshen stale air in a variety of indoor industrial environments.
• Wheel-mounted on a cradled steel frame, the drum enclosed,
heavy-duty 3-blade fan can be rotated between 360° on its vertical
axis to maximise circulation and coverage.
• Powerful airflow via heavy-duty 3-blade fan
• Variable speed settings up to max. 950rpm
• Dynamic airflow function with 360° rotation
• Wheel-mounted frame for outstanding mobility
• Solid mesh steel guarding for greater safety
SIP
36" INDUSTRIAL DRUM FAN
PART NO: 05638
£351
16
BATTERY CHARGING
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
16 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
GYS
ARTCIC 4000 SMART CHARGER/
MAINTENANCE CHARGER
12V
PART NO: 029705
GYS
GYSFLASH 6.12 PRO SMART CHARGER/
MAINTENANCE CHARGER
12V
PART NO: 029613
£117
£49
£154
£87
• The GYSFLASH 6.12 is specifically designed to charge small vehicles’
12V batteries
• Its 8 step intelligent charging curve provides an optimal charge and
charges in half the time of a traditional charger.
• AGM Charge mode for cold weather (less than 5°C) and for Start & Stop
batteries (EFB & AGM). -
• CAN BUS compatibility for motorbikes & vehicles equipped with a 12V
• Boasting a 50% shorter charge time compared to traditional chargers,
the BATIUM range ensures ultra-quick and safe charging by providing a
consistent average current during the 'boost' phase.
• The BATIUM range oers a 100% charge for all lead-acid batteries
• BATIUM range is a microprocessor-controlled, smart charger; it
constantly analyses the battery's status and regulates the charging
process according to the battery's needs.
• The ARTIC 4000 (4 A) is specifically designed to charge 6 and 12 V
batteries.
• It provides fully automatic charging that is twice as fast as a
traditional charger and is equipped with microprocessor technology.
• The battery can be left to charge vehicles completely autonomously.
• Designed to charge 6 V and 12 V batteries: - 6 V: 8 - 70 Ah or for
maintenance charging up to 130 A
GYS
BATIUM 7.12 WORKSHOP SMART CHARGER
12V
PART NO: 024557
GYS
BATIUM 15.12 WORKSHOP SMART CHARGER
12V
PART NO: 024632
• The Batium range controled by microprocessor guarantees you the
maximum eectiveness and security.
• The charge is automatic/without supervision. 50% shorter charge time
compared to a traditional charger.
• Batium ensures an ultra-quick and safe charge, by providing a constant
average current during ""boost"" phase.
• Batium ensures a 100% charge of all lead-acid batteries
NEW
NEW
17
BATTERY SUPPORT UNITS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 17
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
GYS
GYSFLASH 100-12 HF
5.0M CABLES
PART NO: 029002
GYS
GYSFLASH 121.12 CNT-FV
CABLES 5M
PART NO: 027756
• The GYSFLASH 121.12 CNT FV is a 120 A, high power, CONNECTED
charger featuring inverter technology.
• Keeps a 12 V, lead or lithium battery at a perfectly stabilised voltage
during the diagnostic phases.
• Delivers the recommended and most eective charging cycle to
maintain the most advanced vehicles on the market.
• USB connection makes it 100% customisable
• The GYSFLASH 100-12 HF is a 100 A, high-power, stabilised power
supply featuring inverter technology with five separate functions
• Battery support: sustains 12 V (liquid or gel), automotive batteries during
diagnostic work
• Advanced battery charger: ensures ideal charging cycles to maintain
the batteries of even the most modern vehicles
• Showroom mode: maintains batteries in showroom vehicles
• BATTERY CHANGE» mode will maintain an electrical power supply to
preserve the vehicle’s memory settings
£749
£977
GYS
GYSFLASH 101.24 CNT
PART NO: 025967
GYS
GYSFLASH 30.12 PL
PART NO: 026070
£1,025
£252
4 OPERATING MODES
Charge: for 6, 12 or 24 V Lead or Lithium batteries from 5 to 1200 Ah.
- Diagnostic: supports up to 100 A for 12 V or 24 V batteries in vehicles
in the diagnostic phase, in maintenance workshops.
- Showroom: provides power compensation when using the electrical
accessories of a demonstration vehicle. It also manages the optimal
charging of the battery.
- Tester: Allows you to check the battery voltage etc.,
GYSFLASH 30-12 HF is a 30A high power stabilised supply
incorporating Inverter technology with 5 functions
• Battery support: sustains 12V (liquid or gel) automotive battery during
diagnostic work
• Advance battery charger: ensures an ideal charging cycle for battery
maintenance for the most modern vehicle
• Showroom mode: maintains batteries in showroom vehicles
• In «battery change» mode, will maintain electrical supply to preserve
vehicle memory settings
18
BATTERY SUPPORT
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
18 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
SEALEY
BATTERY MONITOR
REMOTE SENSOR
PART NO: BT2020
• Displays real time battery power, voltage and temperature
• Wireless connection with dedicated app which supports up to four
devices (IOS & Android compatible)
• Guide user back to the vehicle by automatically recording the last
parking location
• Record the route, cost and driving habits of each trip, which can be
exported to Excel
• Automatically monitor the starting and charging system of the
vehicle and notify if abnormal
£25
GYS
PBT700 DIGITAL
BATTERY TESTER
WITH PRINTER
PART NO: 024229
£229
• Professional battery tester providing
highly accurate results with in-built printer
• Battery 12 V : voltage test and state of charge
• Starter 12 and 24 V : test of the start voltage
• Alternator 12 and 24 V : test of no load voltage and charging voltage
as well as current undulation during the charge
• Printout of the results using integrated thermal printer (no ink
required)
BATTERY DIAGNOSTICS
JUMP PACKS AND BOOSTERS
SIP
CHARGESTAR D15
PART NO: 03506
£70
• 12v charging output
• 8 step fully automatic charging cycle
• Intelligent microprocessor for fast, easy & safe charging
• Lightweight & compact design
• Reverse polarity protection
• Crocodile clamps & leads
• Easy-to-read digital display
SIP
RESCUE PAC 1600 12V
PART NO: 03936
NEWNEW
Best Seller
• 12v internal battery voltage
• 1600A boost peak rate and 700A cranking rate
• Rechargeable AGM portable pack for boost starting
• 12v DC takeo powers devices direct from booster
• Integrated LED charge rate indication
£172
19
BATTERY JUMP START
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
LOKITHOR
5-IN-1 JUMP STARTER, AIR COMPRESSOR & PRESSURE WASHER
PART NO: SNCAW401
500 LUMEN LIGHT
AIR COMPRESSOR
150 PSI
LED FLASHLIGHT
500 LUMEN
PRESSURE WASHER
200 PSI
POWER BANK
20,000MAH
JUMP STARTER
2,500 PEAK AMPS
5-IN-1
INCLUDES
Jump starter | Inflatable hose | Jump starter clamps | Nozzle adaptors
| USB-C cable & charger | Storage bag | Packing bag | User manual
POWERFUL PERFORMANCE - 2500A starting current, capable of making up to 60 jump starts*,
suitable for petrol and diesel engines, including: cars, motorcycles, boats, RVs, ATVs, SUVs, vans,
tractors, mowers and more.
SAFE & INTELLIGENT - Real time battery voltage detection alarms
the user of any battery abnormalities. built-in battery management
system safety measures include; short-circuit protection, overcurrent
protection, reverse polarity protection, overheating protection, over-
cranking protection, spark-proof technology and supply interruption
protection.
BUILT FOR TOUGH CONDITIONS - IP65 rated and capable of
operating in temperatures between -20°C to 60°C.
60W INPUT & OUTPUT
Fast charging via USB-C devices
*Under test conditions, actual number of starts may vary based on charge status, temperature and engine size
DIGITAL INTERFACE DISPLAY
Gives you battery status, fast charge status,
voltage indicator, tyre pressure info and more!
SCAN CODE
TO SEE MORE!
• Lithium Polymer Batteries
• 2 Year Warranty
• Detachable Clamps
• 12v Charging
• Voltmeter
£250
NEW
19
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
20
BATTERY JUMP START
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
20 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
SIP
STARTMASTER DSC250B DIGITAL
STARTER CHARGER
PART NO: 03585
SIP
STARTMASTER DSC350B DIGITAL
STARTER CHARGER
PART NO: 03586
NEW NEW
• Lithium Polymer
• 2 Year Warranty
• Detachable Clamps
• 12v Charging
• Voltmeter
LOKITHOR
4-IN-1 JUMP STARTER & AIR COMPRESSOR
PART NO: SNCJA302
AIR COMPRESSOR
150 PSI
LED FLASHLIGHT
500 LUMEN
POWER BANK
20,000MAH
JUMP STARTER
2,500 PEAK AMPS
• 12v/24v charging voltage / 250A (1v) peak start current
• 300Ah max. battery capacity and max. 30A charging current
• Auto detects 12v or 24v battery with low activation voltage (1v)
• 4 charge rate settings for added versatility
● 12v/24v charging voltage and 400A max. engine boost-start
● Charging capacity of up to 350Ah max. rated
● Microprocessor-controlledautomatic 10-step charging cycle
● Battery low voltage detector >1v
● One-person operation allows for single user engine boost-start
● LED display screen and intuitive soft touch control panel
4-IN-1
INCLUDES
Jump starter | Inflatable hose | Jump starter
clamps | Nozzle adaptors | USB-C cable & charger
| Storage bag | Packing bag | User manual
60W INPUT
& OUTPUT
Fast charging for
USB-C device
SCAN CODE
TO SEE MORE!
DIGITAL INTERFACE DISPLAY
Gives you battery status, fast charge
status, voltage indicator, tyre pressure info
and more!
NEW
£160
£290 £350
21
BATTERY JUMP START
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 21
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
• 2 in 1 : Starter & Power Supply
• Starts instantly motorcycle, car, camper van without risk to the
vehicle electronics.
• 28 Ah internal battery can supply all electrical devices with 12 V DC,
• Extra light to facilitate visibility during the operation. "
GYS
GYSPACK 750 BOOSTER PACK
12V
PART NO: 026353
GYS
STARTIUM 480 SMART
STARTER/SMART
CHARGER
PART NO: 025578
GYS
STARTPACK PRO 12.24 CI
PART NO: 068162
• STARTIUM 480E is a Starter Charger suitable for AGM/Gel (Stop/
Start) Liquid batteries
• Smart: This device permanently analyses the health of the battery
and automatically adjusts the output voltage.
• Automatic start
• Alternator test function to aid fault finding.
• Fault codes displayed on the digital screen
• Very powerful 12 / 24 V
booster
• Its two high-quality
internal batteries
(ENERSYS: 2 x 30 Ah)
give the STARTPACK
• PRO 12.24 CI a high
starting current (up to
6200 A peak).
• It starts all vehicles
equipped with lead
batteries (liquid, AGM,
EFB, gel...) in a few
seconds: 1300 A in 12 V,
1200 A in 24 V.
• Built-in automatic charger
• Perfect for on-site work
• This product provides protection for the vehicles on-board
electronics,
• For safe use. This product provides protection for the vehicles
on-board electronics, the charger, the battery and the user.
GYS
GYSPACK PRO 800 BOOSTER PACK
12V
PART NO: 072107
• A professional, self-contained starter for all vehicles fitted with 12V
batteries.
• Self-contained starter 12V With its compact design and light weight
• Designed for maximum safety Can be fully recharged from the mains
completely
• Fully unsupervised charging Featuring a lead-acid battery is ideal for
starting passenger cars, vans and small agricultural vehicles.
• GYSPACK PRO 800 is supplied with a cigarette-lighter cable saves
the vehicle’s data memory
£580
£1,280
£720 £418
DIAGNOSTIC MEANINGS
SGW Secure Gateway
Many vehicle manufacturers have started protecting their vehicles with a
diagnostic Secure Gateway and firewalls to prevent unauthorized access
essentially locking out the diagnostic tool. The number of vehicle manufacturers
that are locked will increase in the next few years. These include Volkswagen,
Audi, Seat, Skoda, Mercedes, Fiat, Chrysler, Kia, Hyundai to name a few.
When choosing a diagnostic tool, make sure it is the right tool for your workshop
with the correct vehicle access you require. Call the GE team for advice
DoIP Diagnostics over Internet Protocol
Used on some later Volvo and Jaguar Land Rover Vehicles
CAN Controller Area Network
Used by almost all vehicle manufacturers to communicate between ECU's on a
vehicle and sometimes through the 16 pin OBD Port
CAN FD Controller Area Network Flexi Data Rate
30-times faster data rate than CAN bus, used by many newer vehicles
LIN Local Interconnect Network
Single wire, serial network
J2534 SAE J2534 Pass-Thru
Some diagnostic tools can support J2534 to connect the diagnostic tool to the
vehicle via the manufacturer's diagnostic software, enabling ECU re-flashing,
and in some cases, diagnose vehicles with dealer level functionality.
D-PDU DiagnosticProtocolDataUnit
RP1210 RP1210 is used for reprogramming and diagnosing of emission related (mainly)
Electronic Control Units (ECUs) in Trucks & Plant Machinary
BSU Battery Support Unit are recommended when programming vehicles (see page 17).
POWERHAND
DIGITAL AUTOMOTIVE
MULTIMETER
PART NO: SIN-400.3150
£35 BACKLIT
1.5"
DISPLAY
MAX. VALUE
HOLD FUNCTION
DATA HOLD
FUNCTION
AUTO-RANGING
With 2000 count scale
22
DIAGNOSTICS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
• Overload protection
• Low battery indicator
• K-Type temperature probe included
22 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
23
DIAGNOSTICS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
£350
£140
HUBITOOL
POWER PROBE 3
PART NO: PP-3CSRED
• When the work is hard, Rugged works harder.
• Boost performance and productivity with a rugged laptop powered
by the latest generation Intel® Core™ Processors.
• 5430 i5/16GB/256GB/14” FHD Non-Touch/10Pro
• Upgrades available
• The ideal tool to simulate and
actuate the output signal from
automotive sensors: frequency,
voltage and test sequences
• Simulator functions
1. Simulated resistance
2. Simulated voltage
3. Simulated sine wave
4. Simulated square wave
5. Simulated temperature
coecient sensors:
6. Simulated throttle & pedal
sensor sequences
7. Oxygen sensor: testing
mode and simulated mode
• You can simulate most sensors,
injectors or actuator as ABS
sensor, lambda sensor, EGR
sensor, CKP sensor, knock
sensor, map sensor
FEATURES INCLUDE
Relay & component testing, continuity testing, bad ground indicator,
short circuit indicator and more
DC VOLTMETER INDICATORS Provide active feedback
APPLY POWER & GROUND For functional component testing
8 AMP CIRCUIT BREAKER Protects the tool from overload
LED LIGHTS For a quick visual indicator
AUDIBLE MONITORING OF ELECTRICAL SIGNALS
DELL
LATITUDE 5430
RUGGED LAPTOP
PART NO: DEL5430STD
Suitable For
Most Windows
Diagnostic Tools
Including Bosch,
Hella And
Delphi
DELL
LATITUDE 7220 RUGGED
EXTREME TABLET
PART NO: DEL7220STD
• Latitude Rugged PCs can handle any condition they’re put in.
• Drop-tested from 4 feet, temperature-tested from -28°C to 62°C,
and is IP-65 rated, for maximum protection against dust, dirt, and
water ingress.
• 7220 i5/16GB/256GB/11.6” FHD Touch/10Pro
• Upgrades available
Suitable For
Most Windows
Diagnostic Tools
Including Bosch,
Hella And
Delphi
NEW
HUBITOOL
HAND HELD SENSOR
SIMULATOR
PART NO: HU31035
HEAVY DUTY PC AND LAPTOPS
W
A
R
R
A
N
T
Y
1 YEAR
W
A
R
R
A
N
T
Y
1 YEAR
CALL FOR
LATEST PRICE
FINANCE OPTIONS
AVAILABLE
CALL FOR
LATEST PRICE
FINANCE OPTIONS
AVAILABLE
23
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
24
DIAGNOSTICS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
Small On Price,
Not On Functionality
AUTEL
MS900BT
PART NO: MS900BT
AUTEL
DS900 DIAGNOSTIC TOOL
PART NO: APDS900EU
INCLUDES
• Extended 2 years warranty
SPECIFICATIONS
• Android
• Rockchip RK3566 Quad core
Processor 4x 1.8GHz(A55)
• 64GB internal memory / 4 RAM
• Ultra fast Wi-Fi connectivity
• 8" 1024 x 768 high-resolution
touch-screen
• 8 MP rear camera
• 7,000mAh Lithium-Polymer
Battery
• MaxiVCI Mini wireless
Bluetooth vehicle
communication interface
• Android 11 OS
• Rockchip RK3566 Quad core
Processor 4x 1.8GHz(A55)
• 64GB internal memory / 4 RAM
• Ultra fast Wi-Fi connectivity
• 8" 1024 x 768 high-resolution touch-
screen
• 8 MP rear camera
• 7,000mAh Lithium-Polymer Battery
• Oil and Water screen resistant
• Wired connection to vehicle
• An up-to-date software subscription is
required to access DoIP and
• CAN-FD systems.
FEATURES
• Extensive vehicle coverage for more
than 70+ US, Asian and European
vehicle makes.
• Exceptional OE-Level system coverage
for all electronic systems.
• Complete capabilities for codes, live
data, active test, ECU information
adaptation, matching, etc.
£999
£850
8" TOUCH SCREEN
24 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
25
DIAGNOSTICS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
AUTEL
MAXISYS ULTRA
PART NO: MSULTRA
• MaxiSYS Ultra is the first diagnostic tool to be designed to match
the growth of more complex automotive electrical systems and
EVehicles
• The Ultra has a super large screen, our fastest processors,
our largest ever SSD memory and even a docking station as
standard
• MaxiSYS Ultra and MS919 are supplied with the all new MaxiFLASH
VCMI as standard
• Extended 2 years warranty
• 3-year Software packages
• 80+ Manufacturers
• Full diagnostics
• 26 Service Functions
• Channel coding and programming
• MaxiFlash VCMI included
• Built-In Oscilloscope
12.9" SCREEN
AUTEL
EV EXPANSION PACK UPGRADE KIT
PART NO: 100003196
New EV Ready
£5,500
FINANCE OPTIONS
AVAILABLE
£1,100
FINANCE OPTIONS
AVAILABLE
• The EV Expansion Pack Upgrade Kit includes EV-Diag Box and
adapters for specific electric vehicles to perform battery pack
analysis. The EV-Diag Box is compatible with the MaxiSys Ultra,
MaxiSys MS919, and MaxiSys MS909 tablets. EV-Diag Box connects
to MaxiFlash VCI or VCMI.
• The EV Expansion Pack allows the qualified Level 4 technician to
carry out advanced diagnostics for European, US and Asian Full
Battery and Hybrid vehicles. The Upgrade Kit includes adapters
that are required for specific vehicles, and enables the technician to
directly access the battery packs for full diagnosis.
25
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
26
DIAGNOSTICS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
AUTEL
MS906S
PART NO: APM906SEU
AUTEL
MS909
PART NO: APMS909
• The MaxiSYS MS906S PRO EU comes with a more economical
price point compared to the MS909 while still retaining the
additional advantage of being DoIP and CAN-FD compatible.
Moreover, the MS906S PRO EU oers enhanced software
functionality, granting end-users access to Autel's remote expert
feature.
• To further enhance its capabilities, this model can be optimised
with our ADAS software.
• Tailored for the demands of a busy workshop or technician
seeking comprehensive coverage and capabilities, the MS906S
PRO EU oers superior performance at a very competitive price
that sets it apart from our competitors.
• With the ability to perform numerous functions, and with new
updates rolled out weekly, we are committed to ensuring that
your advanced MaxiSYS remains at the forefront of its class.
• The MaxiSYS MS909 is a cutting-edge diagnostic tablet tailored
for automotive professionals. This 9.7-inch touchscreen Android-
based device is a true powerhouse, driven by an Octa-core
processor, combining a 2.3GHz Quad and a 1.7GHz Quad,
ensuring seamless performance.
• It oers a substantial 128GB of memory to accommodate your
diagnostic needs, and it comes equipped with an advanced
Vehicle Communication Interface (VCI) that supports the latest
communication protocols such as DoIP, D-PDU, and Mega CAN.
• One of the standout features of the MS909 is its topology
module mapping capability, a valuable asset for supported
vehicles. The Intelligent Diagnostics feature is your guiding light
in the diagnostic process, leading you from trouble codes to
repair and testing, all accompanied by detailed repair information
and helpful illustrations.
CALL FOR
LATEST PRICE
WITH EXTRA
DIAGNOSTICS
£2,999
FINANCE OPTIONS
AVAILABLE
£1,800
FINANCE OPTIONS
AVAILABLE
26 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
Truck And Bus Diagnostic Software Options Available.
Please Call 0121 749 8801 Or Enquire With Your Local Branch BATTERY SUPPORT UNIT
RECOMMENDED SEE PAGE 17
DS180
PART NO: SV60250
CAR SOFTWARE 1 YR
PART NO: SV60270
CAR SOFTWARE 3 YR
PART NO: SV60272
Choose the hardware and
software solutions that meet
your needs!
SOFTWARE
HARDWARE
Welcome to the BlueTech Experience!
Delphi Technologies believe every workshop should have access to the best
technology and functionality required to carry out the highest quality repairs
BLUETECH FEATURES
FLIGHT RECORDER:
Perfect for a one-man road test
Select your parameters, hit “Record”
and review when back in the
workshop. With its 4GB Internal
storage capability, enjoy even more
space to record all the data you
need.
WIFI AND BLUETOOTH
CONNECTIVITY TO THE PC:
Wireless communication providing
freedom to work anywhere in
the workshop, whilst maintaining
a seamless connection to the
vehicle.
360° MULTI COLOUR INDICATOR:
Lets you check the status of the VCI
at any time from every angle and
position.
LNTEGRATED DOLP:
No need of any, DoIP adaptor
cable. With its built-in functionality,
the VCI can be plugged directly
on DolP communicating vehicles.
UNIVERSAL:
VCI can be used for cars, light
commercial vehicles, trucks, buses
and coaches, trailers.
PASS-THRU SUPPORT:
Quick and easy access to OEM
flash-programming services.
BATTERY VOLTAGE MONITOR:
Don’t let a dead vehicle battery stop
you working.
CAN FD CHANNELS:
Future-proof design to make the
diagnostic possible on vehicles
requiring this data-communication
protocol.
Delphi Advanced Diagnostics Solutions Laptop/Tablet
Also Available
Free Online Training Once
Purchase Has Been Made
DELPHI
DS180 NEW
27
DIAGNOSTICS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
£1,999
FINANCE OPTIONS
AVAILABLE
CALL FOR
LATEST PRICE
27
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
macsRemote makes any repair possible, regardless of vehicle make or model and enables
coding and programming tasks to be carried out that would otherwise require a visit to the
dealer
By connecting macsRemote to the vehicle and creating a job ticket via our online portal,
our technical team can remotely access all of the vehicle’s electronic systems and perform
the required tasks
Free Demos &
Aftersales
Support
Remote:
Calibrations
| Software
Updates |
Programming
Free Android
Tablet &
Rugged Case
With Every
Macs Remote
28
DIAGNOSTICS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
BATTERY SUPPORT UNIT
RECOMMENDED SEE PAGE 17
AUTEL
MAXISYS MS919
PART NO: APMS919
The MaxiSYS MS919 is a 9.7-inch touchscreen Android-based advanced diagnostic tablet, fuelled by
an Octa-core processor (2.3GHz Quad + 1.7GHz Quad), equipped with 128GB of memory.
HELLA
REMOTE DIAGNOSTICS
PART NO: 12705091
KEY FEATURES
• Remote calbration
• Remote software updates
• Remote programming
• Extensive vehicle coverage for more than 70+ US,
Asian and European vehicle makes.
• Exceptional OE-Level system coverage for all
electronic systems.
• Complete capabilities for codes, live data, active
test, ECU information, adaptation, matching, etc.
9.7" SCREEN
£3,999
FINANCE OPTIONS
AVAILABLE
FEATURES
• 70+ Manufacturers
• 24 Months UK Support
• 24 Months UK Warranty
• Enhanced European Software
• All Modules - Chassis, Powertrain, Body
etc
• Read and Clear Codes
• Live Data/Record/Playback
• AutoVIN Technology
• SAS Functionality
• ABS Functionality
• DPF Functionality
• EPB Functionality
• Climate Control Functionality
• Oil Service Functionality
• Instrument Cluster Functionality
• Steering Angle Sensors
• Service Mileage/Interval Reset
• Battery Registration/Reset
• Adaptions
CALL FOR
LATEST PRICE
FINANCE OPTIONS
AVAILABLE
28 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
29
DIAGNOSTICS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
HELLA
MEGA MACS X
PART NO: 15265851
The new and highly innovative mega macs X from Hella Gutmann Solutions is a revolution in
vehicle diagnostics. A flexible, modular system with state-of-the-art diagnostic technology
at its core, a range of software options and accessories ensures the mega macs X provides
the optimal diagnostic solution whatever your workshop requirements may be, now and as
your needs grow.
KEY FEATURES
• Reading/deleting trouble codes
• DoiP technology
• ADAS Software
• Guided diagnostics
• Cyber Security management
• Full HGS Technical data
• Software levels tailored to workshop
needs
• Multimeter & 2-channel oscilloscope
available at extra cost
• Guided high-voltage measurements
(with MT-HV Pro)
ADDITIONALS
PART NO DESCRIPTION
12705091 MAC REMOTE
15265851 Mega Macs X
15265961 Hella Gutmann Tablet
15267601 X2 1-Year software license
15267611 X3 1-Year software license
15267631 X5 1-Year software license
15266241 MT-HV PRO includes HV cables + Low Voltage
Measurement Module and cables
FREE Demos &
Aftersales
Support
Tablet Available
At Additional
Cost
Market Leading
Don't Forget
Your Battery
Support Unit
£2,399
FINANCE OPTIONS
AVAILABLE
CALL FOR
LATEST DEALS
29
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
30
DIAGNOSTICS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
BATTERY SUPPORT UNIT
RECOMMENDED SEE PAGE 17
HELLA
MEGA MACS PC AND MICROSOFT® SURFACE GO
TABLET WITH RUGGED CASE
PART NO: 15265101/10609341
The mega macs PC diagnostics tool is user-friendly, with intuitive, easy to
use software, enabling even complex diagnostic tasks to be performed with
minimal training. It also provides full access to HGS Technical Data, with wiring
diagrams, symptom-based troubleshooting and step-by-step repair guides for
40,000+ models.
KEY FEATURES
• Read and delete fault codes of all ECUs
• ADAS software as standard
• Cyber security management
• Full access to HGS Technical Data
• Global scan and result storage
• Clear vehicle identification through VIN
• Fault code explanation with detailed possible causes
• Live data readings
• Actuator tests
• Coding
• Service resets including BMW CBS, Longlife and DPF
Free Demos &
Aftersales Support
Call To Discuss
Build Your Package
For Your Workshop
MMPC WITH TABLET
& 1YEAR SOFTWARE
AVAILABLE
CALL FOR
LATEST PRICE
HELLA
MEGA MACS ONE
WITH ANDROID
TABLET
PART NO: 15265101/10609341
Transform your phone
or android tablet into a
multifunctional diagnostics
tool with the mega macs
ONE.
KEY FEATURES
• Read and delete fault codes of all ECUs
• ADAS software as standard
• Cyber security management
• Global scan and result storage
• Clear vehicle identification through VIN
• Live data readings
• Actuator tests
LIMITED OFFER
WITH FREE TABLET
CALL FOR DETAILS
CALL FOR
LATEST PRICE
30 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
31
DIAGNOSTICS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
LAUNCH UK
CRP129 EVO
PART NO: 1011023
It is a cost eective & powerful device for reading the four
main vehicle systems on over 40 manufacturers. Free for
life software updates, 5-inch touch screen, multi-language
options. This is an original European version with two years
warranty and local customer service.
LAUNCH UK
DIAGUN
PART NO: 1110002
Hand held and very portable, complete with printer
and Built in Battery Tester. Ideal for mobile technicians.
Wide vehicle model coverage, powerful diagnostic
function and accurate test data
• Read and Erase Fault Codes
• Live Data
• Actuations
• Oil Reset Service
• Steering Angle Calibration
• Electronic Parking Brake Reset (EPB):
• Battery Register/ Battery Maintenance (BRM): Allows the scan
tool to evaluate the battery charge state, monitor the close-circuit
current, register the new battery replacement, and activate the rest
state of the vehicle battery system
• ABS Bleeding
• Electronic Throttle Position Reset/Learn (ETP)
• Diesel Particulate Filter (DPF) Regeneration
• Tyre Pressure Monitor System Reset (TPMS)
• Gear Learning
• Immobilizer Matching
• Fuel Injector Coding: Diesel & Petrol injector coding
• Reads all modes of OBD-11.
• Read and clear codes, view and graph the live data stream
for four main vehicle systems.
- Engine - Auto Gearbox
- ABS - Airbag
• Include eight special service functions.
- Service/oil light reset - Battery management reset
- Steering Angle reset - DPF regeneration/reset
- Electric parking brake - Injector programming
- Throttle matching - TPMS reset
£265
£850
31
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
32
DIAGNOSTICS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
LAUNCH UK
ISMARTLINK D01
PART NO: 1110001
LAUNCH UK
ISMART 601 MAX
PART NO: 1110006
• The DO1 is an advanced diagnostic tool oering an excellent
range of abilities including,
• Topology mapping, on-line ecu coding, cloud based ecu
programming for 15 brands, guided functions for VW, Auto
& Camera VIN scan. The Smartbox™ VCI supports all known
communication protocols, including RP1210 for Truck
diagnostics. It also meets the requirements for the FCA &
Renault secure gateways.
• The DO1 is fully compatible with Launch ADAS equipment
and the X-prog key programming & ECU cloning tool. DO1
software is Multilingual oering 25 Language options.
• The software includes recently introduced Asian brands such
as Maxus, MG, BYD etc.
• The DO1 includes two years software updates & a two-year
product warranty.
• Supplied in a tough ABS case.
• Developed from the Launch Diagun the 601 Max oers additional
features & functions including; a comprehensive battery test &
TPMS valve read/activate, and programming of Launch sensors.
• Includes two years software updates & two years warranty
• The 601Max features a 7-inch touch screen and on-board thermal
printer.
• Full diagnostics for 100 Worldwide car brands, includes bi-
directional controls, ECU information, reads DOiP & CAN-FD
protocols.
• 26 Special maintenance functions, pre & post scan health reports,
instant print out.
• ADAS ready, 8.0mp Rear camera, dual band Wi Fi, wired DBS15
OBD port connector. compatible with the Launch Videoscope.
Supplied in an ABS case
LAUNCH UK
EURO LINK
PART NO: 1010027
• The newly introduced Euro Link combines innovative local
diagnostics with remote diagnostic capability provided by our fully
insured and equipped service provider.
• Extensive vehicle coverage, accurate test data, powerful test, and
special functions. combine with the integrated Launch CarSet PRO
database (powered by Haynes), giving fault code test plans, wiring
and connector mapping, TSB’s and known fixes.
• The SmartLink™ VCI provides seamless remote service capability,
with compatibility to all protocols including DOiP, CAN –FD. The
Euro Link is also approved by Fiat, Chrysler (FCA) Renault, Nissan,
and now the Mercedes Benz secure gateway. Licenses required.
NEW
NEW
£1,795
FINANCE OPTIONS
AVAILABLE
£3,150
FINANCE OPTIONS
AVAILABLE
£895
NEW
32 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
Software Updates Free
From Manufacturer
Software Updates Free
From Manufacturer
33
DIAGNOSTICS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
WHY BUY A MAVERICK BUNDLE?
Our bundles pair your oem tool with a choice of supported laptop or tablet, Known to work perfectly with their
brand’s diagnostic software.
This allows us to:
☑ Pre-install your OEM software ☑ Test the install with your tool
☑ Help with your OEM registration ☑ Provide Sales Support
MAVERICK
FORD TOOL BUNDLE
PART NO: FORVCM3PAND1A
MAVERICK
JAGUAR LAND ROVER TOOL BUNDLE
PART NO: LDIJLSP0015,LAPASP0038
MAVERICK
VOLVO TOOL BUNDLE
PART NO: VOLCPAND1A
MAVERICK
VAG TOOL BUNDLE
PART NO: VAGVASPAND1A
MAVERICK
BMW TOOL BUNDLE
PART NO: BMPROPAND1A
• Panasonic Toughbook CF-D1 ‘A’
grade
• 100% Genuine Jaguar Land Rover
DA-DOIP D-PDU VCI
• Cost-eective alternative to JLR
Bosch VCI
• Covers all vehicles from 2018
• Initial training course included.
In-depth 2-day training course
available.
• Panasonic Toughbook CF-D1 ‘A’
grade
• 100% Genuine BMW ICOM Next A
VCI & Desktop key reader
• BMW software preloaded
• Supports diagnostic &
programming functions for BMW,
BMW-I, MINI, Rolls-Royce & BMW
Motorrad
• Initial training course included.
In-depth 2-day training course
available.
• Panasonic Toughbook CF-D1 ‘A’
grade
• 100% Genuine Volvo DiCE VCI
• Fully DOIP compatible for use
with the latest XC range
• Includes DOIP adapter
• Initial training course included
• Panasonic Toughbook CF-D1 ‘A’
grade
• 100% Genuine Ford VCI
• For IDS & FDRS Vehicles
• Supports all current Ford
European production vehicles
2016 to current
• Initial training course included
• Panasonic Toughbook CF-D1 ‘A’
grade 100% Genuine PSA VCI
& Code Wizzard Pro to generate
Sermi Incodes
• Compatible with Diagbox, GDS2
and SPS
• Supports newer Vauxhall vehicles
from 2020
• Initial training course included.
In-depth 2-day training course
available.
• Panasonic Toughbook CF-D1 ‘A’
grade
• 100% Genuine VAG Tool
• For all VASS vehicles from 2000
onwards
• Assistance with VASS registration
Initial training course included.
In-depth 2-day training course
available.
Software Updates Free
From Manufacturer
Software Updates Free
From Manufacturer
Software Updates Free
From Manufacturer
Software Updates Free
From Manufacturer
MAVERICK
PSA TOOL BUNDLE
PART NO: PSAPANCFD1A
£3,700
FINANCE OPTIONS
AVAILABLE
£3,000
FINANCE OPTIONS
AVAILABLE
£4,200
FINANCE OPTIONS
AVAILABLE
£3,850
FINANCE OPTIONS
AVAILABLE
£2,300
FINANCE OPTIONS
AVAILABLE
£3,800
FINANCE OPTIONS
AVAILABLE
W
A
R
R
A
N
T
Y
1 YEAR
W
A
R
R
A
N
T
Y
1 YEAR
W
A
R
R
A
N
T
Y
1 YEAR
W
A
R
R
A
N
T
Y
1 YEAR
W
A
R
R
A
N
T
Y
1 YEAR
W
A
R
R
A
N
T
Y
1 YEAR
33
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
BATTERY SUPPORT UNIT
RECOMMENDED SEE PAGE 17
34
DIAGNOSTICS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
ESI-TRONIC 1 YEAR SOFTWARE OPTIONS
DESCRIPTION PART NO DETAILS PRICE
ESI
DIAGNOSTIC 1987P12821
DIAGNOSTIC PACKAGE WITH DIAGNOSE AND EXPERIENCE
BASED REPAIR
• (A) Vehicle information/Equipment catalogue
• (SD) ECU Diagnosis
• (TSB/EBR) Service bulletins, Known faults
CALL FOR
DETAILS & PRICES
----------------
TAILOR YOUR
SOFTWARE FOR
YOUR BUSINESS
ESI
ADVANCED
1987P12841
1687P15131
ADVANCED PACKAGE WITH DIAGNOSE AND GUIDED
TROUBLESHOOTING
• (A) Vehicle information/Equipment catalogue
• (SD) Diagnosis of control units
• (TSB/EBR) Service bulletins, Known faults
• (CoRe) Connected Repair
ESI
MASTER
1987P12911
1687P15131
MASTER PACKAGE WITH DIAGNOSE, GUIDED
TROUBLESHOOTING, CIRCUIT DIAGRAMS & MAINTENANCE
SCHEDULES
• (A) Vehicle information/Equipment catalogue
• (SD) Diagnosis of control units
• (TSB/EBR) Service bulletins, Known faults
• (SIS) Repair instructions and manuals
• (P) Circuit diagrams for comfort systems
• (M) Maintenance schedules and information
• (CoRe) Connected Repair
BOSCH
KTS PACKAGES
THE BENEFITS OF THE KTS 560 AND 590 AT A GLANCE
• Support of all current vehicle interfaces based on Ethernet and parallel operation of
several BUS systems, including JLR vehicles
• Advanced PassThru interface for programming
• Works on any Windows 10 OR 11 PC on which the Bosch diagnosis application
ESI[tronic]2.0 is installed and licensed
• (Rugged Windows laptops available from GSF, please contact the GE Team for details)
• Mobile and stable operation thanks to powerful Bluetooth interface
• Up to three CAN and K-Line interfaces can be used at the same time
• Wireless Bluetooth connection to the workshop PC allows increased
coverage enabling mobile use throughout the workshop
• Rugged construction for long-term everyday workshop use
• KTS 590 also includes a 2-channel oscilloscope.
See Page 23 For
Laptops
KTS 560 & 590: Modern control unit diagnosis for the highest
level of eciency and accuracy. The robust communication
modules KTS 560 and KTS 590 are optimally suited for the
use of the Bosch diagnostic software ESI[tronic] 2.0 Call To Discuss
Building your own
Bosch KTS package
CALL FOR
LATEST PRICE
& PACKAGE DEALS
34 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
35
DIAGNOSTICS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
• Microsoft Surface Pro 7+
• Quad-Core 11Gen, I5 Processor
• 8GB/ 128 Memory
• 6+ hours battery live when in use
• 1x USB-C
• 1x USB-A
• Front and Rear Camera
• Wireless WiFi6, BT 5.0
• 77g weight (tablet only)
• Active Pen included with holder
• Detachable hub for future
development
• Safety strap
• Rugged case with built in stand
• 2-point safety strap
DELPHI
DS480 TABLET
Power of a laptop, convenience of a tablet!
DS480
PART NO: SV60251
£2,700
Complete Kit
HARDWARE
CAR SOFTWARE 1 YR
PART NO: SV60270
£699
CAR SOFTWARE 3 YR
PART NO: SV60272
£1,550
SOFTWARE
NEW
FINANCE OPTIONS
AVAILABLE
12.3 " SCREEN
CALL FOR
LATEST
PACKAGE DEALS
35
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
CALL FOR
LATEST PRICE
AUTEL
TPMS VALVE METAL
PART NO: APMX433
£25
AUTEL
TPMS VALVE RUBBER
PART NO: APMXSENSOR1RUBBER
£25
AUTEL
MX SENSOR NEW
AUTEL
TPMS DIAGNOSTIC AND
TPMS PROGRAMMER
PART NO: ITS600
MaxiTPMS® ITS600 EU is an all new TPMS
tool that can work in conjunction with the
new TBE tyre wear tool
5.5" SCREEN
Supplied
With Free
Uk Software
Updates
NEW
36
DIAGNOSTICS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
• Autel’s universal MX-Sensors at 433mHz can
be programmed to replace 90% of the sensors
on the road today and are built to match or
exceed OEM sensors in frequency, strength
and durability
• The 4-SKU sensor solution can greatly reduce
sensor inventory investment and improve
customer service
• Autel’s MX-Sensor values are independently
tested and certified to meet the SAE industry
standard J1205/ J1206 ratings
• Autel MX Sensors are available with Metal or
Rubber Value Stems
KEY FEATURES
• Optical Scanner Identifies VIN/MMY
• Exclusive TPMS Status Screen
• Fast OBD ll Relearn
• Opy By OBD Sensor Programming for Faster Service
• Batch Program Up to 20 Autel 1-Sensors
• Activate, Read, Relearn All Known TPMS Sensors
• Wireless OBDII Connection via Bluetooth VCI
• Tyre Pressure Placard Value Reset
• Includes 4 Commonly Used Maintenance Service
Functions
• 24 Months UK Telephone Support
• 24 Months UK Warranty
36 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
TPMS
37
ADAS CALIBRATIONS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
Advanced Driver Assistance Systems (ADAS) are primarily focused on collision
avoidance technologies, lane departure warning, blind-spot monitor and driver aids
such as night visions, driver alertness and adaptive cruise control.
• From 2020 on, new vehicles have had to incorporate multiple ADAS systems (incl. Autonomous
Emergency Braking & Lane Departure Warnings) to achieve a 5 Star NCAP (New Car Assessment
Program) rating.
What are the requirements for servicing ADAS in the aftermarket?
• ADAS calibration should taken place
• If faulty, camera/radar/ECU replaced
• After windscreen replacement
• After wheel alignment adjustment
• After mechanical repair aecting geometry
• Following collision / body shop repair
Insurance guidelines state that a repairer shall, in all cases:
• Identify the presence, or not, of adas on the vehicle and ensure this is recorded.
• Where adas are present, ensure repair procedures clearly identify if inspection, realignment and
calibration are required and why.
• Complete all relevant inspection, realignment and calibration activities as detailed within the repair
procedures.
• Inspection, calibration, realignment and road tests shall be carried out by a currently competent person.
• Ensure the calibration results confirm that the sensors are functioning within the vehicle manufacturer’s
technical specification.
• Produce fully verifiable and auditable records and provide a copy to the Asset Owner / Work Provider.
• Leading automotive legal advice is that “A workshop is under a general duty to provide its service with
reasonable skill and care and delivering a vehicle with incomplete repairs results in a safety issue. As
ADAS technology becomes commonplace, workshops are vulnerable to a claim if they either have failed
to recalibrate, failed to refer a customer to a specialist for recalibration or failed to notify a customer
before commencing a repair that recalibration is required.”
Return on Investment
• The average cost of the equipment for a new entrant to ADAS is approx. £24,000.
• A workshop can get a full return on investment within 6 months by only carrying out 2 calibrations per
day and charging £150 (average price per calibration for the UK is £200-£300).
• Key opportunities include calibrating whenever wheel alignment carried out and advertising
ADAS capability to local garages and body shops.
37
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
38
ADAS CALIBRATIONS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
AUTEL
10000851 Main Frame + Wheel Clamps + VAG-LDW Board (CSC0601/01)
10000851/04 ACC Mirror
CSC0602/01 Reflector
CSC0602/06 Hex Wrench
CSC0602/07 Mini Reflector
10000851 Main Frame + Wheel Clamps + VAG-LDW Board (CSC0601/01)
10000851/04 ACC Mirror
CSC0602/01 Reflector
CSC0602/06 Hex Wrench
CSC0602/07 Mini Reflector
CSC0600/02 Supporting Lane Brackets
CSC0601/08 Honda Lane Maintenance Pattern Type 2 (Left and Right)
CSC0601/05 Honda Lane Maintenance Pattern Type 1
CSC0601/11 & 15 Toyota/ Lexus Lane Maintenance Patterns 1 & 2
CSC0601/09 Hyundai/ Kia Lane Mainteneance
CSC0601/02 Mercedes Benz Lane Maintenence
CSC0601/06L&R Nissan/ Infinity Lane & Driveway Maintenance
CSC0601/07 Hyundai/ Kia Lane Maintenance
If you buy either the Basic Package or the
Common Package, but don’t have an existing
MS908Pro or Elite, then it is possible to buy a
ADAS MS909 at the same time.
If you already have an MS908 or MS Elite, simply buy the ADAS
software when you buy your ADAS frame to upgrade your tool
FREE DEMOS &
AFTERSALES SUPPORT
FULL PACKAGE BUNDLE
ADAS SOFTWARE
MS909
CALL FOR
LATEST PRICE
CALL FOR
LATEST PRICE
CALL FOR
LATEST PRICE
CALL FOR
LATEST PRICE
NEW
FINANCE OPTIONS
AVAILABLE
38 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
ADAS BUNDLE CAMERA
39
ADAS CALIBRATIONS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
HELLA
CSC SE BASE FRAME & WHEEL MODULE
PART NO: 015269101 & 015269101
HELLA
CSC MOBILE
PART NO:10624001
HELLA
CSC DIGITAL & WHEEL MODULE
PART NO: 015269501 & 015269101
HELLA
ADAS
As pioneers of ADAS calibration equipment, Hella Gutmann oers a range of
solutions to suit all workshop needs; from the original CSC SE kit through the
CSC mobile solution right through to the very latest solution – the CSC Digital.
CALL FOR
LATEST PRICE
FINANCE OPTIONS
AVAILABLE
REQUEST A DEMO TO FIND THE RIGHT
SOLUTION FOR YOUR WORKSHOP
39
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
40
ADAS CALIBRATIONS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
BOSCH
SYSTEM
PART NO: DAS3000
New bumper plate for precise distance measurement to the bumper. Printout which
documents the correct alignment of the calibration device. Controlling vehicle specific
calibration easily with diagnostic software ESI[tronic] 2.0 Online, in conjunction
with KTS (not included – see page 27), conforms with OEM requirements.Trolley
with universal fixture designed for installation of multiple Target boards: rapid and
accurate 1-point, 2-point and sequential calibrations. XL Multi-function board covers
all OEM Radar mounting heights.
• State-of-the-art calibration equipment for front and rear facing camera & radar systems
• Camera-based – for greater accuracy and increased speed
• Combined VAG target and radar reflector (included)
• Accurate positioning in relation to the ""vehicle driving axis""
• Universal wheel clamp with targets
• Automatic distance measurement (distance target via reference panel)
• Positioning software included (Requires DCU 220 or own laptop)
• Multibrand target support and all-makes capable with vehicle-specific calibration via Bosch ESI[tronic] 2.0 software.
Easy To Use
Installation
And Training
Included
FINANCE OPTIONS
AVAILABLE
CALL FOR
LATEST PRICE
PACKAGE TAILORED TO
YOUR WORKSHOP NEEDS
40 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
41
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
ADAS CALIBRATIONS
TEXA
RCCS3 DIGITAL ADAS MASTER VOICE DIAGNOSTIC HARDWARE KIT
PART NO:UKDC3100
TEXA
AXONE MINI DIAGNOSTIC
PART NO: UKDC2720
NEW
• Axone Nemo Mini Tablet
• Navigator Nano S Interface
• IDC5M Car Software
• Vans & Light Commercial up to 3.5 Tonne
• ADAS coverage included at no extra cost
• EV/HYBRID coverage included at no extra cost
• 12 Months updates
• 12 Months Tech Support
DIAGNOSTIC TOOL S
• AXONE Voice
• IDC5 Premium Car Software
• IDC5 Supercar Software
• TXT MULTIHUB
• AXONE Voice Handle
• 12 Months Car Texpack Software
Updates
• 12 Months Car Tex@info Technical
• 3 Year Warranty
RCCS 3:
• RCCS 3 Digital Calibration Rig
• 2 x Self Centering Wheel Clamps
• 2 x Laser Heads
• Digital Measures
• Centering Laser
• LCV Extension Kit
• 2 Years Warranty
Simply scan the QR
code to see video
W
A
R
R
A
N
T
Y
2 YEAR
FINANCE OPTIONS
AVAILABLE
CALL FOR
LATEST PRICE
PACKAGE TAILORED TO
YOUR WORKSHOP NEEDS
FINANCE OPTIONS
AVAILABLE
CALL FOR
LATEST PRICE
PACKAGE TAILORED TO
YOUR WORKSHOP NEEDS
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 41
42
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
42
WHEEL & TYRE
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
42 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
42 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
CONTINENTAL
FDP1050 TYRE CHANGER
PART NO: 2910003226400
CONTINENTAL
FDP1070 TYRE CHANGER
PART NO: 2910003226600
• Automatic tyre changer for cars and light commercial
vehicles, suitable for low profile and run flat tyres as well as
sport alloy rims.
• Smart rim capacity from 12” to 26”
• Pneumatic control for up/down operating mounting head
• A pneumatic system which raises the arm, the column
• Can be lifted higher enabling this way to operate on
• Wheels of 15” width
• Pneumatic tilting column by pedal control
• The bead breaker oers two dierent positions in order
• To facilitate the bead-breaking operation on wheels of all
diameters
• Double acting bead breaker cylinder
• Equipped with the special built-in device for tubeless
inflation, pedal operated, with air tank
• Inverter technology for variable rotation speed, controlled
by the pedal
• Plastic protection on the mounting head, jaws and bead
• Breaker blade to prevent damage to alloy rims
• Smart Rim capacity from 10” to 24”
• Pneumatic tilting column by pedal control, reinforced
• Pneumatic control for up/down operating mounting head
• Double acting bead breaker cylinder
• Inverter technology for variable rotation speed, controlled
by the pedal
• Plastic protection on the mounting head, jaws and B/B
blade to prevent damage to alloy rims
• Easy maintenance
• RF helper arm system
• Suitable for low profile & run flat tyres
£4,499
FINANCE OPTIONS
AVAILABLE
£5,350
FINANCE OPTIONS
AVAILABLE
Tyre Equipment From The Tyre People
NEW
NEW
TYRE EQUIPMENT FROM THE TYRE PEOPLE
CONTINENTAL, THE NEW HOME OF CRYPTON
43
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 43
WHEEL & TYRE
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 43
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 43
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
CONTINENTAL
FDR1060 WHEEL
BALANCER
PART NO: 2910003216700
CONTINENTAL
FDR1080 WHEEL
BALANCER
PART NO: 2910003216800
• Intuitive LED display and bright light positions indicators
• Automatic acquisition of wheel distance and diameter data
• Mechanical pedal brake and laser light indicator for applying
adhesive weights
• Imbalance minimisation program
• Optimisation program
• Special program for choosing the desired weight type among
iron, zinc and lead in order to guarantee a higher accuracy
• ALU + ALU specific programs
• 6 o’clock weight positioning (ALU special program)
• O road specific program
• 2 balancing programs for motorbike wheels
• Hidden weight and split weight program
• Calibration of the complete axial assembly
• Motorbike flange calibration
• Provided with 4 cones (cones working size 42-140mm)
• Software update through USB key
• LCD monitor with VESA mount
• Smart controls keypad
• Automatic 3D data entry via sonar (Distance - Diameter - Width)
• Innovative sensor gauge for diameter and distance data entry for
ALU rims that automatically start ALU Special balancing program
without keyboard
• Electromagnetic brake with automatic search of the unbalance
position
• LED lighting to illuminate the working area (helpful for inner gauge
positioning and weights application)
• Laser indicator for applying adhesive weights
• ALU + ALU specific programs
• 6 o’clock weight positioning (ALU special program)
• Hidden weight and split weight program
• O road specific programme
• 2 balancing programs for motorbike wheels
• Special program for choosing the desired weight type among iron
zinc and lead in order to guarantee a higher accuracy
• Calibration of the complete axial assembly. The calibration
program provides the resetting of the mechanical group
• Motorbike flange calibration. The machine presents the unique
feature of calibrating the single motorbike flange without its
mechanical group assuring more accurate results
• Calibration of the electromatic brake with adjustable torque
control to guarantee the most precise stopping position
• Provided with 4 cones (cones working size 42-140mm)
• Software updates through USB key
£2,999
FINANCE OPTIONS
AVAILABLE
£4,250
FINANCE OPTIONS
AVAILABLE
Continental Tyre Service Packages Available
NEW
NEW
TYRE EQUIPMENT FROM THE TYRE PEOPLE
CONTINENTAL, THE NEW HOME OF CRYPTON
44
WHEEL & TYRE
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
44 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
EAE
EE-48801D AND EE-3096AV2
PART NO: GEQEE-TPD1
SERENCO
WHEEL NUT KIT
PART NO: SIN-130.0030
• EAE EE-4880ID Tyre Changer with Assist Arm & EAE EE-3096V2 Wheel balancer
• Suitable for passenger car + motorcycle and light commercial vehicle wheels
• EAE EE-4880ID Tyre Changer with Assist Arm
• Strong Assist Arm & Pneumatically operated tilting column
• Simultaneous pneumatic horizontal and vertical arm locking
• Pneumatic bead breaker
• Durable and convenient operation
• Tilting column and pneumatic locking system
• Bigger bead breaker cylinder ø200, more powerful
• Max. wheel diameter: 45
• Max. wheel width: 14
• Outer clamp:12-23
• Optional Motorcycle clamp:12”-26”
• CE certified
Optional: Motorcycle adaptor Jaws
Tyre Package
Deal 1
• Plastic Sleeves to prevent the scratching of alloy wheels
• Suitable for use with an impact wrench
• Supplied inlaser cut EVA foam, housed in a heavy-duty power case
INCLUDES
• Standard Profile Sockets15mm | 17mm | 19mm | 21mm | 22mm | 23mm | 24mm
• Specialist Profile Sockets17mm - Mercedes-Benz | 21mm & 27mm - Hyundai | ⁄" - Tesla
£50
PRICE FROM
£2,650
FINANCE OPTIONS
AVAILABLE
45
WHEEL & TYRE
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
Package 1
Package 2
HOFMANN
PART NO: EEWH762AED/EEWB767AE1
HOFMANN
PART NO: EEWH762AED/EEWB768AE1
SPECIAL OFFER: PACKAGE DEAL
3300-24 TYRE
CHANGER
• Use automatic turntable speed control
while also dealing with larger and ultra-high
performance tyres with the Hofmann Monty
3300-24 smartSpeed tyre changer.
• It oers a high productivity speed via the
built-in smartSpeed inverter technology
which automatically controls the speed
of the turntable dependant on the torque
required when mounting/demounting
the tyre, along with a large 24-inch outer
3300-24 TYRE
CHANGER
• Use automatic turntable speed control
while also dealing with larger and ultra-high
performance tyres with the Hofmann Monty
3300-24 smartSpeed tyre changer.
• It oers a high productivity speed via the
built-in smartSpeed inverter technology
which automatically controls the speed
of the turntable dependant on the torque
required when mounting/demounting
the tyre, along with a large 24-inch outer
GEODYNA 7100
WHEEL BALANCER
• Includes 2D SAPE (Semi-Automatic Param-
eter Entry) to measure wheel oset and
wheel diameter in one process, the VPI
measuring system for high accuracy, and
split weight mode to hide weights behind
spokes for a better finish.
• Pair up the Geodyna 7100 with the Hof-
mann Monty® 3300 20 Smart tyre changer
to create a tyre and wheel service package
for your workshop
• 2D SAPE (Semi-Automatic Parameter
Entry): Measure the wheel oset and wheel
GEODYNA 7200
WHEEL BALANCER
• Make the most of a video display along
with advanced data input and patented
measurement systems thanks to the
Hofmann Geodyna 7200 video wheel
balancer, which is designed for cars, light
trucks and motorcycles
• 2D SAPE (Semi-Automatic Parameter
Entry): Measure the wheel oset and wheel
rim diameter in one process
• Hidden weight mode: Place adhesive
weights behind spokes, giving you an
appealing cosmetic finish
• VPM measuring system: Achieve accuracy
and reliability by limiting discrepancies
caused by changes in ambient temperature
45
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
PRICE FROM
£4,599
FINANCE OPTIONS
AVAILABLE
PRICE FROM
£5,999
FINANCE OPTIONS
AVAILABLE
46
AIR CONDITIONING
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
WHEEL & TYRE
46 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
46 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
TECALEMIT
TIRO PLUS PACK
TTC TIRO PLUS & TBM TIRO PLUS
PART NO: TTC/TIROPLUS/1 & TBM/TIROPLUS
TECALEMIT
WHEEL BALANCER
TBM TIRO PLUS
PART NO: TBM/TIROPLUS
• Internal data entry & weight positioning arm
• Adhesive weight position guide
• Automatic rotation & positioning via One-touch operation
• Data memory to store common wheel size combinations
• Hidden weight and optimisation facility
TECALEMIT
TYRE CHANGER
TTC TIRO PLUS
PART NO: TTC/TIROPLUS/1
• Clamping range 10” – 26”
• Max Wheel diameter 1070mm
• Max Wheel width 380mm
• Bead breaker force 2800kg
• Versatile three arm assistant system, ideal for RFT Tyres
• TiroRoller Assists with the removal of the tyre from the rim
• TiroFollower Follows the wheel rotation through the fitting cycle
• TiroLifterDisc Assists with the lifting of the lower bead during tyre
removal
CALL FOR
LATEST PRICE
CALL FOR
LATEST PRICE
FINANCE OPTIONS
AVAILABLE
FINANCE OPTIONS
AVAILABLE
47
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 47
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 47
AIR CONDITIONING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 47
AIR CONDITIONING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
WHEEL ALIGNMENT
47
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 47
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 47
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 47
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 47
ABSOLUTE ALIGNMENT
BLUETOOTH 3D
PART NO: GEQBLUETOOTH3D
• 6 Camera CCD Technology - ADAS ready
• 4” Pro wheel clamps (no metal-to-metal contact)
• Use on 4 or 2 post lifts plus wheel free scissor lift
• Simple to understand before/after colour printout
• Low spoiler mode
• Cabled charging
• Remote control heads
• Smartphone/Tablet app operation available
• VRM Number plate look up (Shoot & Go) option
• Supplied with: 24” Pro Clamps/ Ball Bearing Turn Plates (1 Pair)/ Steering
• Wheel Clamp/ Brake Pedal Depressor/ 20,000+ Vehicle Database/ Cabinet /
• Keyboard/ Monitor/ Colour Printer
• SUV wheel clamp extension arms
• 12 Month warranty
• Onsite training
• 6 Camera CCD Technolgy - ADAS ready
• 24” Pro wheel clamps (no metal to metal contact)
• Use on 4 or 2 post lifts plus wheel free scissor lift
• Simple to understand before/after colour printout
• Low spoiler mode
• Wireless charging
• Remote control heads
• LED front head repeater adjuster lights
• Smartphone/tablet app operation available
• VRM number plate look up (Shoot & Go) option
• Supplied with: 3pt 24” Pro Clamps/ Ball Bearing Turn Plates/
Steering Wheel Clamp/Brake Pedal Depressor/ 20,000+
Vehicle
ADAS Ready
ADAS Ready
ABSOLUTE ALIGNMENT
BLUETOOTH PRO
PART NO: GEQBLUETOOTHPRO
PRICE FROM
£11,999
FINANCE OPTIONS
AVAILABLE
PRICE FROM
£7,500
FINANCE OPTIONS
AVAILABLE
48
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
48
WHEEL ALIGNMENT
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
48 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
48 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
2 Year Warranty
Robotically
Welded Frames
SERENCO
WORKSHOP PRESS
20 TONNE
PART NO: W04-0501
£743
• Precision robotic welded frame
ensures maximum durability and
product lifespan
• Adjustable height pressure plate
• Extra wide internal frame to cover
wider applications
• Manual operation hydraulic pump
• Capacity: 20T
• Ram Stroke: 186.5mm
• Working Range: 38 - 912mm
• Bed Width: 510mm
• Net Weight: 105kg
• Main Body Dimensions: 650 x 700
x 1618mm
• Frame Type: Welded
SERENCO
WORKSHOP PRESS
50 TONNE
PART NO: W04-0503
2 Year Warranty
Robotically
Welded Frames
With Foot
Control
£1,908
• Precision robotic welded frame
ensures maximum durability and
product lifespan
• Adjustable height pressure plate
• Extra wide internal frame to cover
wider applications
• Horizontal ram adjustment for
maximum application versatility
• Manual operation hydraulic pump
• Capacity: 50T
• Ram Stroke: 200mm
• Working Range: 68 – 1048mm
• Bed Width: 730mm
• Net Weight: 298kg
• Main Body Dimensions: 2110 x 315
x 1618mm
• Frame Type: Welded
ABSOLUTE ALIGNMENT
BLUETOOTHLITE
PART NO: GEQBLUETOOTHLITE
• Towerless design releases workshop space
• 3D Camera Technology - ADAS ready
• 24” Pro wheel clamps (no metal to metal contact)
• VRM number plate look up (Shoot and Go)
• Use on 4 Post or Scissor Lift
• Simple to understand before/after colour printout
• Perfect for low cars
• Remote Control heads
• Smartphone/tablet app included
• Supplied with: 3pt 24” Pro Clamps/Ball Bearing Turn Plates (1 Pair)/Steering
Wheel Clamp/Brake Pedal Depressor/20,000+ Vehicle Database/Cabinet /
Keyboard/Monitor/Colour Printer
• SUV wheel clamp extension arms
• 12 Month Warranty
• Onsite Training
LIFTING / HYDRAULICS
PRICE FROM
£7,990
FINANCE OPTIONS
AVAILABLE
49
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 49
LIFTING/HYDRAULICS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 49
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 49
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
HURRICANE
AXLE STANDS
12 TONNE | PAIR
PART NO: W064201
• 2 Year Warranty
• Heavy duty design makes it suitable on automotive, commercial
and industrial work.
• Extending Threaded ram for extra lifting height when required
• Internal bypass means unit cannot be overloaded
• ADJUSTABLE SADDLE HEIGHT For easy positioning on lift rod
• Fully welded frame for maximum strength
• Locking Pins With Storage Slot
• Convenient Carry Handle
• Working Range 300-470mm
Wide Base
For Maximum
Stability
Adjustable
Saddle Height
SERENCO
PNEUMATIC BOTTLE JACK
20 TONNE
PART NO: W06-2001
NEW
£119
SERENCO
LOCKING AXLE STANDS
WITH EXTRA PIN
3 TONNE | PAIR
PART NO: W06-4001
Supplied As
A Pair
£32
£125
SERENCO
ENGINE STAND
WITH GEAR BOX
500KG
PART NO: W06-1551
2 Year Warranty
Foldable
£310
• 500kg load capacity
• Superior stability and
manoeuvrability to single leg type
• Adjustable mounting arms to
fit most engine bolt pattern
configurations
• Foldable for easy storage/
transportation
• Locking head plate with 360°
rotation (via crank handle)
• Heavy duty low geared worm drive
allows eortless rotation
• Chrome plated ram ensures smooth operation and prevents
corrosion
• External return springs allow easy servicing
• Adjustable height saddle for easy positioning on lift load.
• For use with an airline
50
LIFTING
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
50 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
Lift Height
1189 - 2000mm NEW
Lift Height
1175 - 1985mm
£202 £250
• Double pump
mechanism for rapid
lift
• Wide stance base
lowers the centre of
gravity maximising
stability
• Chrome plated ram
reduces fr iction
ensuring a smooth lift
• Twin handle design
• Precision descent
control valve
• Greasing points for
long life
• Auto return release
control for ease of
use
• Max lift : 500m
• 810mm lifting stage
• Rubber saddle
available separately
• Auto return release
• Nylon wheels for
smooth, quiet
and damage free
movement on
various surfaces
SERENCO
PREMIUM TRANSMISSION
JACK QUICK LIFT
500KG
PART NO: W06-1503
SERENCO
TRANSMISSION
JACK
500KG
PART NO: W06-1501
SERENCO
HYDRAULIC ONLY
BOTTLE JACK
20 TONNE
PART NO: W06-2010
NEW
Height Range
235 - 500 mm
SERENCO
LOW ENTRY PNEUMATIC
BOTTLE JACK
20 TONNE
PART NO: W06-2005
NEW
Height range
177 - 323mm
£130 £58
• Heavy duty yet easily portable with attached carrying handle
• 20t capacity makes it suitable for general automotive, commercial
and industrial applications
• Extending Threaded ram for extra lifting height when required
• Internal bypass so unit cannot be overloaded
• Pneumatic and
manual operation for
flexibility
• Low 177mm entry
(32% shorter than
standard model)
• Heavy duty design
makes it suitable
on automotive,
commercial
and industrial
work.
• Extension
screw thread
in Ram allows
extra lift height
if required.
• Safety bypass valve
means jack cannot be
overloaded
• Air hose has swivel connector to avoid tangling or snagging in use.
51
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 51
LIFTING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
HURRICANE
MECHANICAL VEHICLE SKATES
Scan here to see how
easily a car can be
lifted and moved
W06-3001
W06-3002
IDEAL FOR A WIDE ARRAY
OF WORK SPACES
Including workshops,
bodyshops, showrooms and
roadside recovery
SPACE SAVING DESIGN
The 4th skate becomes the
rack base
PREMIUM BEARINGS
Allow for hassle free
movement of the vehicle in
any direction
RELIABLE RATCHETING
MECHANISM
Capable of eortlessly lifting a
vehicle weighing up to 2.25T
(567Kg capacity per jack)
HEAVY
DUTY
NYLON
CASTORS
For low
vibration and
noise across
most surfaces
W063001 W063002
DESCRIPTION VEHICLE SKATE SINGLE Rack for 3+1 Skates
WEIGHT CAPACITY 567kg per skate -
FITS TYRE WIDTHS Up to 11” -
51
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 51
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
SERENCO
AUTO BODY REPAIR KIT
4 TONNE
PART NO: W06-2502
SERENCO
AUTO BODY REPAIR KIT
10 TONNE
PART NO: W06-2501
Complete
Master Set
COMPLETE MASTER SET With extention pieces, spreader, heel,
toe & plate
• 267mm Min Lift
• Snap Ring Assembly
• Manually operated hydraulic pump with 130mm stroke
WHEELED STORAGE CASE For safe storage & easy transportation
• 267mm Min Lift
• 120mm stroke
• Full control for bending, straightening & general metal/body
manipulation
• Designed for auto body alignment & straightening, ideal for post-
damage restoration
Designed For
Auto Body
Alignment &
Straightening,
Ideal For
Post-Damage
Restoration
£127 £185
52
LIFTING
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
EAE
MOBILE SCISSOR LIFT 3 TONNE
MID RISE VEHICLE RAMP
PART NO: EEMR30.E
• Ideal for tire service and narrow bays
• Mobile or fixed mount design
• Electrical released
• Durable cylinders with anti-surge valves
• 24V safe control system
• Height limit switch
• Powder coated finish
• Self-lubricated bushing and bearing
• The safeguard against one end tilting allows car to drive from either side
• Drive up ramps lock into position as platform extension for longer vehicles
• Optional mobile kit makes the lift move in your garage very easy
• Aluminum motor with fan on top to avoid overheating caused by long time working
PRICE FROM
£2,150
FINANCE OPTIONS
AVAILABLE
52 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
SILENT TECHNOLOGY
HIGH SCISSOR LIFT
3.5 TONNE
PART NO: STL35
• Electro-hydraulic double scissor lift for mounting
on the workshop floor
• Fully automatic lifting and lowering at the touch of
a button
• 4 rubber pads for attaching to the vehicle are
included in the scope of delivery
• Automatic synchronization of the two scissor
elements at the push of a button
• High lifting height
• Absolute freedom of doors
• Low space requirement
3500KG
WEIGHT LIFTING
CAPACITY
3000KG
WEIGHT LIFTING
CAPACITY
PRICE FROM
£3,900
FINANCE OPTIONS
AVAILABLE
SPECIFICATIONS
• Drive-over height 110 mm
• Electrical connector 400 v/3 ph/ 50 hz
• Lifting time approx. 60 Sec.
• Max. Lifting height 1900 mm
• Max. Overall width 2220 mm
SCISSOR LIFTS
53
LIFTING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
PRICE FROM
£2,650
FINANCE OPTIONS
AVAILABLE
53
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
4000KG
WEIGHT LIFTING
CAPACITY
EAE
EE–6254E
4T TWO POST LIFT
PART NO: EAE6254E
CE certified by SGS UK
• Base plate design for low ceiling application
• Electrical safety lock release system
• Abs control box
• Anti–surge hydraulic valve
• Max. lifting height: 1,900MM
• Min lifting height: 100MM
SILENT TECHNOLOGY
MID RISE SCISSOR LIFT
3.5 TONNE
PART NO: AB-MR3500
• 1 m maximum height.
• 105 mm minimum height.
• Compressed air, required for safety lock release (min 4bar
pressure)
• Runs on domestic 240v, no 3 phase installation required.
• Can be left mobile or bolted down, (mobile kit included in
the price!)
• Brass on steel bearings, no nylon guide blocks!
**Buy in confidence! comes with a 3 year warranty!
** Parts Only 3500KG
WEIGHT LIFTING
CAPACITY
PRICE FROM
£2,199
FINANCE OPTIONS
AVAILABLE
2 POST LIFTS
54
LIFTING
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
LIFTMASTER
'WIDE' ELECTRO/MECHANICAL
BASELESS 2 POST LIFT COMES
WITH SYMMETRICAL 3 STAGE FRONT
ARMS SUITABLE FOR DROP IN HEIGHT
EXTENSIONS
PART NO: LMS3500W
CALL FOR
LATEST PRICE
FINANCE OPTIONS
AVAILABLE
• Automatic lubrication system to ensure
constant lubrication during lifting & descent
• Electro-Mechanical Synchronisation ensures
the carriages are kept within a 20mm level
tolerance
• Low pad height of 95mm
• Symmetrical arm configuration with two long
4-stage front arms & two long 2-stage rear
arms
• ideal to lift cars & car derived vans
• The Bradbury H24113G series is a good quality, 4-tonne,
electro-hydraulic lift with an overhead gantry, leaving the
floor completely clear – ideal for moving transmission
jacks or oil drainers under the suspended vehicle. This
lift also comes with the option of a high gantry extension,
making it suitable for taller vehicles as well as cars.
• Available in both 1PH and 3PH, this is a great choice for
most workshops!
FEATURES
• H Type Base Frame
• 3kW Motor Size
• 2-year warranty
• 1 Phase or 3 Phase
• 95mm minimum height
• 3450mm lifting height
• 2530mm drive through width
• 50 seconds lifting and lowering time
• Min/max arm length - 600mm/1250mm
BRADBURY
2 POST LIFT
4 TONNE | 3 PHASE OR SINGLE PHASE
PART NO: H2411/3G
54 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
3500KG
WEIGHT LIFTING
CAPACITY
DESIGNED
IN
ITALY 4TON
WEIGHT LIFTING
CAPACITY
PRICE FROM
£4,499
FINANCE OPTIONS
AVAILABLE
55
LIFTING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 55
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
LIFTMASTER
BASELESS, ELECTRO/HYDRAULIC, ASYMMETRIC 2 POST LIFT
COMES WITH 2 STAGE ARMS, COMES WITH 65MM EXTENSIONS
SINGLE PHASE PART NO: LME4001
3 PHASE PART NO: LME4003
CALL FOR
LATEST PRICE
FINANCE OPTIONS
AVAILABLE
• Baseless two post lift, clear floor with no obstructions, easy to use.
• Mechanical safety latch with automatic engagement ensuring maximum safety when lift is in standing position
• Top shut-o bar to prevent damage when lifting high vehicles
• Twin hydraulic rams are designed for intensive use and minimise down time, by requiring little maintenance
• Robust arm locking device
• 4 x 65mm height extensions included 4000KG
WEIGHT LIFTING
CAPACITY
56
LIFTING
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
BENDPAK
2 POST LIFT CLEARFLOOR BI-METRIC TRIPLE REACH ARMS
COMES WITH SCREW PAD, 63MM & 125MM HEIGHT ADAPTERS
PART NO: 10AP
CALL FOR
LATEST PRICE
FINANCE OPTIONS
AVAILABLE
• Exclusive Bi-Metric triple reach arm design
for more versatile arm positioning
• Expandable top beam to accommodate
wide or narrow drive-thru configurations
• Double-telescoping screw pads oer
increased versatility
• Automatic arm restraints withstand over
900 Kg of side force
• Single-point safety release
• 14-piece standard adapter set
56 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
SILENT TECHNOLOGY
TWO POST LIFT
4 TONNE
PART NO: STL42
• The Silent Technology Model STL 42 AS electronic
4 ton lift boasts a range of beneficial features
designed to enhance functionality and user
experience. Here are the key benefits:
• Powerful Lifting Capacity: With a robust 4-ton lifting
capacity, this model can comfortably handle a wide
range of vehicles, making it versatile for various
automotive needs.
• Three-Stage Telescopic Arms: The inclusion of 4x
3-stage telescopic arms facilitates better reach and
adaptability, ensuring you can lift a broad range of
vehicles safely and securely.
• Pad Extensions: The two sets of 4 pad extensions
enhance the versatility of the lift, allowing it to
cater to vehicles of dierent heights with ease and
precision.
• Convenient Pad Holders: Having pad holders
directly on the post of the lift makes for easy
access and improves the eciency of the lifting
process.
4536KG
WEIGHT LIFTING
CAPACITY
• Single and Three Phase Options: The flexibility of single and
three-phase options allows you to choose the model that best
fits your power supply and operational requirements.
• Included Hilti Floor Anchor Bolts: The inclusion of Hilti floor
anchor bolts provides a secure installation, improving the
stability and safety of the lift.
• Silent Operation: True to its name, the Silent Technology lift
operates quietly, reducing noise pollution in your workspace.
Now Come With 3 Stage
Arm Front And Rear
PRICE FROM
£2,550
FINANCE OPTIONS
AVAILABLE
57
LIFTING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 57
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
• Platforms accommodate wide or narrow vehicles
• Platforms include rail kit for jacking beam or
optional accessories
• Optional caster kit available
• Internal “anti-sway” slider blocks in each column
BENDPAK
4 POST LIFT
COMES WITH 4166MM PLATFORMS
PART NO: HD9
• Platforms accommodate wide or narrow vehicles
• Platforms include rail kit for jacking beam or
optional accessories
• Optional caster kit available
• Internal “anti-sway” slider blocks in each column
BENDPAK
4 POST LIFT
COMES WITH 4775MM PLATFORMS & EXTRA
HEIGHT 2197MM
PART NO: HD9XW
4082KG
WEIGHT LIFTING
CAPACITY
4082KG
WEIGHT LIFTING
CAPACITY
£4,900 £5,200
FINANCE OPTIONS
AVAILABLE FINANCE OPTIONS
AVAILABLE
WHEEL ALIGNMENT LIFTS
MODEL NO. CAPACITY PLATFORM LENGTH/
CONFIGURATION
SF/9944/4 4.0T 4.0m, 190mm min. height
SF/9008/4 4.0T 5.0m, 200mm min. height
SF/9008/6 5.0T 5.2m, 190mm min. height
SF/9008/7 5.0T 5.7m, 155mm min. height
SF/8976/4 6.0T 6.0m, 190mm min. height
ATL & OPTL LIFTS
MODEL NO. CAPACITY PLATFORM LENGTH/
CONFIGURATION
SF/9254 4.0T 4.3m, 145mm min. height
SF/9057 4.0T 5.2m, 130mm min. height
SF/9257 5.0T 5.7m, 155mm min. height
SF/9265 5.0T 6.5m, 155mm min. height
SF/8976/ATL 6.0T 6.0m, 240mm min. height
CALL FOR
LATEST PRICE
CALL FOR
LATEST PRICE
FINANCE OPTIONS
AVAILABLE
FINANCE OPTIONS
AVAILABLE
TECALEMIT
4 POST LIFTS
58
LIFTING
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
58 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
TECALEMIT
4-POST LIFTS
SERVICE & MOT LIFTS
MODEL NO. CAPACITY PLATFORM LENGTH/
CONFIGURATION
SF/9436/SR 3.5T 4.3m, 120mm min. height
SF/9006 4.0T 4.5m, 130mm min. height
SF/9084 4.0T 5.0m, 165mm min. height
SF/9250 5.0T 5.2m, 170mm min. height
SF/8976 6.0T 6.0m, 190mm min. height
• Available in a range of lifting capacities & platform lengths
• Surface mount and recessed options
• Single and 3 phase options
• Radius plates and jacking beam can be fitted for MOT purposes on
many models
Ideal For MOT Testing
And Wheel Alignment
CALL FOR
LATEST PRICE
FINANCE OPTIONS
AVAILABLE
59
MOT BAYS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
• Lift (Comprehensive range of Class IV & VII
4-Post Lifts & Scissor Lifts) & Pit lanes.
• Hydraulic shaker plates (wireless with scissor
lifts).
• Turntables.
• Attractive checker plated platforms.
• New Extra wide jacking beam (Manual or Air
Hydraulic)
• New DVSA approved MTS connected CCP1000
combined emissions tester with WIN11 OS PC, 27”
screen, mouse, keyboard & printer with robust
mobile trolley & ergonomic top. (Bluetooth or
cabled)
• VCI OBD - RPM & Temperature Device (Standard
with Bluetooth emissions tester).
• DVSA approved MTS connected Roller Brake
Testers (Controlled through the emissions
tester – 40” TV screen displaying brake tester &
emissions readings optional).
• Brake tester heavy duty galvanized cover plates.
• Brake tester 4x4 facility as standard.
• Twin laser headlamp aligner for testing class IV &
VII vehicles.
• Brake pedal depressor.
• Convex mirrors x 2
• Delivery & Installation included to a prepared site
CONTINENTAL
FULL ATL PACKAGE
CALL FOR
LATEST PRICE
FINANCE OPTIONS
AVAILABLE
59
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
Quality DVSA
Approved Automated
Test Lanes for MOT
Testing with
3 Years Warranty
Comprehensive
range of Class IV
& Class VII, MTS
Connected MOT
Bay’s
Specialists in MOT
Project Management
– Consultation, CAD
Drawings, DVSA
Applications
4000KG
WEIGHT LIFTING
CAPACITY
5000KG
WEIGHT LIFTING
CAPACITY
Especially designed to suit your workshop. Call the 0121 749 8801 for a competitive personalised quotation.
CONTINENTAL, THE NEW HOME OF CRYPTON
THE FUTURE OF WORKSHOPS ALL FROM A SINGLE SOURCE
w
60
MOT BAYS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
60 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
• A full site survey will be completed by our area sales manager, this
will include a CAD layout plan of the MOT equipment and your
existing workshop
• Full support will be given with all DVSA applications and sign o
processes. These will be undertaken by our area sales manager.
• Flexible service, calibration & warranty plans are available
• Groundworks can be undertaken by our inhouse team
• 4 Post Lifts can be upgraded to Scissor Lifts
• 4 Post Lifts or Scissor Lifts can include ‘dual revenue’ wheel
alignment platforms.
LIFTMASTER
CLASS IV 4 POST MOT BAY | ATL 4 POST LIFT
COMES WITH 4460MM PLATFORMS, PLAY
DETECTORS, CAPTIVE TURN PLATES & 2000KG
JACKING BEAM, ITALIAN ROLLER BRAKER TESTER &
HEADLAMP BEAM ALIGNER
PART NO: 4ATLEF446B
MADE IN
ITALY
Class VII
Also Available
4000KG
WEIGHT LIFTING
CAPACITY
CALL FOR
LATEST PRICE
FINANCE OPTIONS
AVAILABLE
61
EMISSIONS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 61
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
YOUR 21ST CENTURY NECESSITY
• The wireless VCI is more of a necessity than ever before to ensure accurate RPM
readings, even for the cleanest diesel engines.
PERFORMS EOBD FUNCTIONS:
• View EOBD Data
• Read & Clear EOBD Fault Codes
• Diesel RPM Measurement
• Oil & Coolant Temperature (Currently approved for diesel RPM only)
• Powertrain diagnostic data and freeze frame data
• Read and clear DTC’s
• Oxygen sensor testing monitoring results
CONTINENTAL
COMBINED GAS AND SMOKE ANALYSER
VCI INCLUDED
PART NO: 2804040002301
£7,199
FINANCE OPTIONS
AVAILABLE
FEATURES & BENEFITS
• Complies to the latest DVSA regulations
(MTS connected)
• Approved for category A & B MOT
testing
• Euro 6 compliant
• Robust mobile cabinet with ergonomic
top
• All components housed inside fully
enclosed unit protecting from workshop
environment
• Large 27" Monitor and WIN11 OS
• External easy to access USB ports
• Additional Gas and Smoke probe
holders
• Futureproof design to house and
support Particle number counter (PNC)
• Easy to maintain with external access
panels Fast warm up time
• Smoke Meter (cabled or Bluetooth
option) Sampling pipe accessories to
suit HGV
• Gas analyser accurate to OIML Class 0
Temperature probe (OBD VCI option)
Battery RPM Measurement (OBD VCI
option) Integrated option to control the
brake tester from one working station
(when purchased) Supplied calibrated
from factory
• Service & calibration packages available
• Supplied calibrated from factory &
Manufactured and supported in the UK
UPGRADE FOR COMPLETE
PEACE OF MIND
5-YEAR | COMBI COMPREHENSIVE 60 ANNUAL |
ADDITIONAL 2 YEARS WARRANTY | INCLUDES ALL
CALIBRATIONS
CONTINENTAL, THE NEW HOME OF CRYPTON
THE FUTURE OF WORKSHOPS ALL FROM A SINGLE SOURCE
W
A
R
R
A
N
T
Y
3 YEAR
The Continental 1000 series Combined Smoke and Gas Emissions Analyser.
DVSA approved Connected equipment for testing petrol and diesel engines.
CALL FOR
LATEST PRICE
FINANCE OPTIONS
AVAILABLE
62
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
62
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
62
GENERAL WORKSHOP
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
62 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
62 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
62 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
CARBON CLEAN
PRO VERSION WITH HEATED DRYING,
BEFORE AND AFTER PRESSURE
READING WITH PRINTER FOR CARS
AND LCV
PART NO: DCS16PRO
CARBON CLEAN
PRO VERSION WITH HEATED
DRYING, BEFORE AND AFTER
PRESSURE READING WITH PRINTER
FOR CARS AND LCV
PART NO: DCS20
• Mid-range machine oers more scope for bigger engine types
with notable added features. The powerful 4Kw per hour
generator produces up to 1800 litres of HHO per hour which
can clean out a 4 litre engine in just 30 minutes.
• Removes carbon build-up from a 4 litre engine in just 30
minutes
• Handles any car or light commercial engines
• RAID technology
• Shut down protection CAMS leads
• Touch screen
• Set and forget feature
• Compact size and weight
• Gas hose/ outflow
• Solution fill
• Liquid level indicator
• Digital interface
• Control panel
• Power & working indicator
• Emergency stop button
• Shutdown protection connector
• Shutdown protection clips
• Wifi enabled/ Antenna
• Walk away technology
• Commercial vehicle DPF machine, equipped
to eciently handle any domestic or com-
mercial DPF ranging to even boats and mo-
torbikes, with some notable added features.
• Alarm/ Operation button
• Top of the range machine
• Emergency stop button
• Cabinet style design
• Temperature display
• Adjustable Pressures
• Pressure gauge
• Printer system to show pre-service/ post
service results
• Control button
• Active Filteration
• Air pump with manual & auto mode
• Adjustable water temperature for better
results
• Dierential pressure display
• Can remove upto 100% of soot/ ash in DPF
• Printer
• Automatic set and forget function
• Winch hook remote
• Auto pneumatic pulsator
£6,495
£39,995
NEW
NEW
HEATED DRYERS & CLEANERS
63
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 63
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 63
GENERAL WORKSHOP
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 63
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 63
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 63
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
CARBON CLEAN
ENGINE CARBON CLEAN MACHINE
FOR CAR/LCV
PART NO: CC14PRO
• Mid-range machine oers more scope for bigger engine types with
notable added features. The powerful 4Kw per hour generator
produces up to 1800 litres of HHO per hour which can clean out a 4
litre engine in just 30 minutes.
• Removes carbon build-up from a 4 litre engine in just 30 minutes
• Handles any car or light commercial engines
• RAID technology
• Shut down protection CAMS leads
• Colour screen interface
• Set and forget feature
• Compact size and weight
• High Pressure Cleaning System is our powerful heavy duty parts
cleaner with some notable added features. With a powerful
air gun, detergent nozzle along with a heater and blower, this
machine easily removes tough carbon build-up on various engine
components.
• Deep-clean many dierent engine components
• Very easy to use machine
• No mess or leakage design
• Has various tools and fittings to remove heavy carbon build-up
• 12 months warranty
£9,995
CARBON CLEAN
HIGH PRESSURE PARTS
CLEANING MACHINE
800PSI
PART NO: HPCS16
£4,995
64
GENERAL WORKSHOP
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
64 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
CARBON CLEAN
ENGINE CARBON CLEAN MACHINE FOR
CAR/LCV/TRUCK, WITH DPF SMART
CLEAN
PART NO: CC26
• New dual-purpose Engine Carbon Cleaning and
revolutionary on-car DPF Cleaning system. An
all-in-one machine capable of removing carbon
from internal combustion engines and the DPF.
This model is designed to the passenger vehicle
and light commercial sectors.
• Description: HHO Engine & DPF Cleaner
• Model No.: CC-26
• Input Power: AC 220V Single Phase
• Output Power: Max 4KW or ≤ 4KW
• Display Mode: Touch Screen, Multi-User
Interface/Analogue V&A Gauge
• Net Weight 115 kg
• Dimensions 570(W) x 810(L) x 11400(H) (MM)
• Cells Wet Cell/9X9 RAID Technology
• Vehicle Type Cars, Motorbikes, Boats, Mini
Truck
STANNER
UNIVERSAL WALNUT BLASTER
CARBON REMOVAL TOOL
PART NO: TKR/STA-236
• Used to treat the surface of inlet channels
and valves, removing carbonized material
without aecting the metal surface by using a
pressurised jet of walnut granules.
• Compressed air is used to propel the blast
medium –a pressure regulator for adjusting
the air pressure with an integrated water
separator is included
• Why Walnut Granules?
• Nut shell granules are a natural product made
from purified, ground walnut shells which are
used as a blast medium for the gentle cleaning
of surfaces.
• Due to the low hardness and low specific
weight, no material is removed from the
workpiece.
• When cleaning internal combustion engines,
due to the organic nature of Walnut shell,
any residual blast medium simply burns away
without residue.
£1,533
£10,995
65
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
GENERAL WORKSHOP
LASER
TRANSMISSION SUPPORT
ARM
PART NO: LA 8579
Engine and
Gearbox
ENGINE AND GEARBOX
• Combined with a traditional gearbox
jack the patented Laser 8579 simplifies
gearbox removal and fitting by supporting
the gearbox from above. It does this by
attaching to a traditional vertical gearbox
jack and providing a specially shaped
arm that goes up the side of the gearbox
LASER
ENGINE/GEARBOX SUPPORT
PART NO: 5750
• Designed for transverse-engined vehicles, the
frame will support the engine and/or gearbox
when carrying out repair operations like clutch
or gearbox removal, DMF change, removing
and replacing engine and gearbox mounts, for
cam belt replacement, etc
• With car on ramp, engine/gearbox position and
height can be adjusted from underneath
£250
£201
65
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
66
GENERAL WORKSHOP
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
LASER
COOLING SYSTEM PRESSURE TEST KIT
PART NO: 5614
TYRE REPAIR
COOLING SYSTEM DIAGNOSTIC
LASER
COMPRESSED AIR
TYRE BEAD SEATER
6L
PART NO: 8771
• This tyre bead seater is ideal for
use on cars and light commercial
vehicles to help fit the tyre bead
on the rim.
• The 6L tank can be charged using
the workshop air supply, up to a
maximum pressure of 145psi.
• 6L air inflator tank, blasts air into
the gap between tyre & rim
forcing the bead to seat against
the rim. For best results use in
conjunction with a tyre inflator
via the tyre valve.
• Working pressure: 60 - 116psi
(4 – 8 bar).
£280
£129
• A comprehensive coolant system pressure testing kit for universal
use. Locates system leaks from header/expansion tanks and
fittings, head gasket, radiator core, heater matrix, water pump,
hoses, pipes and etc.
• Working pressure: 60 - 116psi (4 – 8 bar).
• Maximum pressure: 145psi (10 bar).
• Features: Automatic safety valve, trigger for air release, easy to
read pressure gauge & supplied with a 1/4"" BSP male standard
airline adaptor.
• CE certified.
• Maximum pressure: 145psi (10 bar).
FEATURES:
• Automatic safety valve, trigger for air release, easy to read
pressure gauge & supplied with a ⁄"
• BSP male standard airline adaptor.
• CE certified.
66 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
67
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
INDUCTION HEATERS
67
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
Capable for
most jobs
GYS
POWERDUCTION 37LG
INDUCTION HEATER
3700WATT
PART NO: U56992
Welding
GYS
DUAL GAS KIT
GAS ART 580 & OXYGEN
PART NO: 40366
GYS
POWERDUCTION 10R
INDUCTION HEATER
1200WATT
PART NO: 68643
SYKES
VENOM INDUCTION HEATER
DELUXE KIT
PART NO: 960400SP
• Eleven labelled coils; nine in diameter and are a variety of lengths
from 114mm to 266mm long
• Generates invisible heat® to release corroded and thread locked
metal components
• Angled design with trigger lightweight, ergonomic design
• Coil twist lock
LED usage indicator
• Welds most of thin metals
• Wide range of uses for micro welding, assembly of thin sheet metal,
cutting thin sheet metal.
DELIVERED WITH :
• Pressure reducer,
• Anitflashback valves
• 1.5m hose
• Torch with 2 tips (Ø0.5 and Ø0.65)
• Goggles
• Case + 1 oxygen cylinder + 1 novacet cylinder.
• Designed to heat, unlock to enable the removal of mechanical
parts, such as worn nuts and bolts, in just seconds.
• Instant and flame-less heat can be applied to a specific area; it can
be used close to cables, pipes or other heat-sensitive objects
• Lightweight: weighing in at just 3.5 kg (only 1.3 kg for the inductor
alone).
• Uses a standard, 230 V/ single-phase power supply.
• 1,200 W of output power with a high duty cycle
£2,579
£785
£552
£137
• The ideal tool for mechanical and maintenance work:
• Essential for releasing the steering linkage (wheel alignment).
• Removes glow plugs, seized-up wipers and spare wheel
compartments.
• Releases seized up bolts.
• Releases steering ball joints without damaging the bellows.
• Releases shaft drives seized up in the hub.
• Removes automotive or HGV exhaust lines.
68
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
68
TRANSMISSION
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
LAUNCH UK
CAT601S ATF MACHINE
PART NO: 1037005
• CAT-601S Clean Gear is fully featured automatic transmission
cleaner and fluid exchanger.
• The NEW CAT-601S is complete and delivered with a
wide range of adapters to connect to most gearbox units,
including dual clutch and CVT types.
• The NEW CAT-601S Automatic transmission maintenance
equipment is perfect for all types of passenger cars and
vans.
• Built in printer and large display screen with easy to read
gauges
• World universal atf adapter set available at extra cost
• Free set up, demo and training, plus after-sales support from
launch uk technical experts
£3,293
FINANCE OPTIONS
AVAILABLE
68 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
68 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
• Manually operated oil dispenser comes complete with a range
of Automatic Transmission Fluid adaptors with quick fix coupling.
Simply open the ball valve and the pump handle will dispense 70cc
per cycle.
• Range of ATF adaptors to suit Audi, BMW, Ford, Volkswagen.
• Will dispense 70cc per cycle.
• Large visual measurement will identify the amount dispensed.
SIP
SUB 3040 SUBMERSIBLE WATER PUMP
PART NO: 06865
• Powerful 400w/0.5hp brushless induction motor
• Fitted float switch prevents pump from running dry
• Max. 6mtr pumping head for quick draining
• Drains water with particles up to Ø 3mm
• Lightweight and compact design
LASER
OIL ATF DISPENSER
7L
PART NO: 4792
£49 £192
69
TRANSMISSION
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
2 Year Warranty
With Oil Level
Indicator
£260
• Large 80 litre
capacity allows
for less frequent
downtime for
emptying waste oil
• Grid filter in drain
pan to allow the
support/draining of
old filters into unit
• Extract oil directly
from vehicle with
air pressure to
produce vacuum
• Sturdy all welded
steel construction
• Self-steering
castors and heavy-
duty wheels for
easy locating of
drainer
• Oil level indicator
tube on reservoir
to avoid overfilling
HURRICANE
OIL DRAINER WITH
EXTRACTION
80LTR
PART NO: W07-0001
69
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
SERENCO
CV BOOT TOOL
PART NO: BOO003
• New angled design with ergonomic body for
easier operating
• Suitable for larger cars and vans
• Reduces fitting time to approximately 20 minutes
• Lightweight, only weighs 1.9 kg
• Designed for single handed operation
• One model that covers all vehicle models
• Working pressure 4 to 7 bar
• Standard airline fitment
• Can be disconnected from the airline for fitting
• Supplied ready assembled
• Use with stretchy Duraboot® and
Universal CV boots
• Suitable for CV boots from 15-155mm
• 5 year warranty
£88
MADE IN
UK
SIP
GRAVITY OIL DRAINER
80LTR
PART NO: 03700
£264
• Collects waste oil or
fluids from vehicle
components
• 80ltr heavy-duty steel
collection tank and 20ltr
tray
• Versatile 1195mm to
1810mm adjustable
height range
• Wheel and castor-
mounted for simple
positioning
• 40°C to 60°C working
temperature for engine
oil
• Oil level indicator
tube on the oil
reservoir
70
TRANSMISSION
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
70 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
TIGREN
SUCTION OIL DRAINER
70LTR
PART NO: 08208
SIP
SUCTION OIL DRAINER
80LTR
PART NO: 03711
£253 £346
• 70ltr heavy-
duty steel
tank
• 10ltr collection
tray
• Wheel and
castor-
mounted for
manoeuvrability
and positioning
• 1040mm to
1500mm
adjustable
height range for
versatility
• Integrated oil
level indicator
tube on the oil
reservoir
• Compact design
with a small
physical footprint
• Collects waste oil or
fluids from vehicle
components
• 80ltr heavy-duty
steel collection tank
and 20ltr tray
• Versatile 1190mm to
1810mm adjustable
height range
• Wheel and castor-
mounted for simple
positioning
• 40°C to 60°C
working temperature
for engine oil
• Oil level indicator
tube on the oil
reservoir
• Compact design with wall-mountable bracket
• Meter with 4 digit subtotal and 8 digit grand total
• Powerful 550w AC motor with copper-wound armatures
• Supplied with non-return valve to aid self-priming
• Built-in bypass system for start and stop operation
• 15mtr pumping head and 2mtr suction head
• Compact design with wall-mountable bracket
• Meter with 4 digit subtotal and 8 digit grand total
• Powerful 160w DC motor with copper-wound armatures
• Supplied with non-return value to aid self-priming
• Built-in bypass system for start and stop operation
• 10mtr pumping head and 2mtr suction head
SIP
DIESEL TRANSFER
PUMP 230V
WITH METER
PART NO: 06807
£224
SIP
DIESEL
TRANSFER
PUMP 12V
WITH METER
PART NO: 06805
£188
71
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 71
WELDING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
SEALEY
REFLECTIVE RIGGER'S GLOVES
PAIR
PART NO: SSP14HV
• Strong stitching, a generous fit and quality materials make this an
ideal glove for heavy trade use.
• Bright dual coloured backing and reflective bands for increased
visibility.
• Conforms to BS EN 21420:2020 and 388:2016 Level 2242X.
• Gauntlets oer superior protection from spatter and heat.
• Comfortable, durable and preferred by the professional welder.
• Size guide: L/XL.
• Conforms to BS EN 388 and BS EN 407.
SEALEY
LEATHER WELDING GAUNTLETS
LINED | PAIR
PART NO: SSP141
£7
£3
SEALEY
REFLECTIVE RIGGER'S GLOVES
PACK OF 6 PAIRS
PART NO: SSP14HV/6
• Strong stitching, a generous fit and quality materials make this an
ideal glove for heavy trade use.
• Bright dual coloured backing and reflective bands for increased
visibility.
• Conforms to BS EN 21420:2020 and 388:2016 Level 2242X.
£16
71
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 71
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
GYS
ARC WELDER
160AMP
PART NO: 36635
GYS
EASYMIG 85
RTWK
PART NO: U65536
• Gysmi E163
• Suitable for all types of electrodes such as steel, stainless steel or
cast iron
• Very good penetration and perfect arc stability
• Delivered in a case with earth clamp and electrode holder
• No gas required
• Complete with Gauntlet and Hand Shield
£258
£380
WELDING
72
WELDING
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
GYS
MIG WELDING WIRE
0.6MM 5KG REEL
PART NO: 086111
GYS
MIG WELDING WIRE
0.8MM 5KG REEL
PART NO: 086128
• This solid, copper-coated wire is for gas welding non- and low-alloy
carbonated steel.
• It has many useful applications in metal construction due to its
excellent mechanical properties.
• Filler metal for MAG welding of non-alloy and low-alloy steels.
• Filler metal for MAG welding of non-alloy and low-alloy steels
• Excellent ignition properties
• Great arc stability on high currents
• A good, corrosion-resistant wire
• Enables welding in all positions
• The anti-arc protection preserves the
electronics of a vehicle by absorbing the
overvoltage peak during welding operations or
vehicle interventions.
GYS
ANTI-ARC SURGE
PROTECTION
12V
PART NO: 041318
GYS
LCD GYSMATIC 5/13 TRUE COLOUR
PART NO: 37908
• Essential for safety, the
GYSMATIC TRUE COLOR XL
optoelectronic hood protects the welder’s face and eyes from UV,
infrared and splashes
• Fully automatic, the mask switches from clear to tinted state in a
fraction of a second as soon as it is primed
• Optimum visibility: XL screen
• High sensitivity thanks to 4 sensors
• TIG welding > 2A • Active filter: shades 5-9/ 9-13 • Range 5-9:
£140
72 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
GYS
MULTIWELD 200M
WITH ACCESSORIES
PART NO: 066595
GYS
25AMP PLASMA CUTTER PACK
EASYCUT 25
PART NO: 72046
• Powerful 25Amp plasma cutter ideal for cutting most types of metal
up to 8mm. Compact & lightweight with an easy to use control
panel.
• Features no contact arc ignition
• Powerful but compact plasma cutter
• Add to script requires .6mm rollers and tips to use 0.6mm wire
suggest we add thisas a kit and increase the sale price to cover
£19
£23
£29
£635
£782
73
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 73
WELDING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 73
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 73
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
• The AUTOPULSE 220-M1 is the MIG/ MAG pulsed generator
with integrated wire feeder for car body. Equipped with a digital
PFC (Power Factor Correction) it supplies pulsed welding quality
comparable to three-phase products. Designed for the highest
performance it features several synergic curves and exceptional
arc quality. Versatile, it can carry out all types of welding: Steel,
Aluminium and Brazing (CuSi3/CuAl8). Its intuitive interface and its
high precision wire feed are ideal for car-body with best welding
quality even on thin sheet
GYS
INVERTER MIG WELDER
AUTOPULSE 220-M1
PART NO: 65024
GYS
INVERTER MIG WELDER
MIG-MAG SINGLE PHASE SYNERGIC
PART NO: 32903
• M1 GYS AUTO with accessories
• THE M1 GYS AUTO is a single phase MIG-MAG, with torch
connector, recommended for welding steel, stainless steel,
aluminium and for MIG brazing of high-tensile strength steels with
CuSi and CuAl wires (ideal for car body repairs)
• SYNERGIC MODE: The machine determines the optimum wire
speed by selecting: - the type of wire - the wire diameter - the
welding current
£3,719
£1,471
BRAKES
LASER
BRAKE PAD THICKNESS GAUGE
PART NO: 5848
LASER
BRAKE DISC
DIGITAL VERNIER
GAUGE
PART NO: 4584
LASER
HIGH PRESSURE BRAKE BLEEDER
PART NO:8395
LASER
MEASURING TOOL
SET DTI
3 PIECE
PART NO: 7687
• A comprehensive DTI (Dial Test indicator)
gauge set, designed to be used for the accurate
• 12v powered brake bleeder
has an adjustable fluid
pressure output from zero to
3.5 bar (50psi)
• Designed to be used with a
5L brake fluid container
• A handy tool for essential brake pad service.
• Colour coded, using the trac light system,
• allowing you to quickly check and demonstrate the
measurement of the thickness of brake pad material.
• Sizes: Green 8, 10 and 12mm Yellow 4, 5 and 6mm and Red 2
and 3mm
• Brake Disc Digital caliper vernier gauge
• Measures in metric and imperial (0-150mm and 0-6inch).
• Data Hold function, LCD reading on a 12mm display
• Ideal to show customers clearly when their brake discs need
replacing.
• Supplied with 2 batteries and in a plastic storage case"
£104
£6
£870
£86
74
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
74
PRESSURE WASHERS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
74 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
74 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
SIP
SD1260BAT
ELECTRIC FLOOR SCRUBBER DRYER
PART NO: 07982
SIP
VALETING MACHINE 1400W
20LTR
PART NO: 07916
SIP
SD1260AC
ELECTRIC FLOOR SCRUBBER DRYER
PART NO: 07980
• 1260mtr³/hr battery-powered scrubbing performance
• Large 360mm scrubbing area and 440mm squeegee width
• Large 20ltr collection
tank for minimal cleaning
interruption
• 3ltr detergent tank for added
cleaning power for stubborn dirt
• Easy switching between vacuum
and detergent modes for
versatility
• Mounted on 2 large wheels
and 2 swivel castors for simple
mobility
• 1.5mtr hose, detergent
attachments, floor brush and
crevice tool
• Quick rear drain plug for simple
waste water removal
• 1260mtr³/hr mains-powered scrubbing performance
• Large 360mm scrubbing area and 440mm squeegee width
• Easy access to mechanical parts without the need for tools
• Powerful mechanical traction ideal for stubborn cleaning
• Large 11ltr cleaning and 13ltr recovery solution tanks
• Wheel-mounted folding design for easy mobility
£149
£1,846 £1,333
PRESSURE WASHING
75
PRESSURE WASHERS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 75
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
SIP
TEMPEST
PH540/150
HOT WASH
PRESSURE
WASHER
PART NO: 08954
SIP
1200/40 VALETING
MACHINE
40LTR
PART NO: 07928
SIP
SCRUBBER DETERGENT
10LTR
PART NO: 02401
• 2175psi (150bar) max. pressure and 540ltr/hr flow rate
• Brass-headed COMET Axial plunger pump for an increased lifespan
• Heavy-duty 2800rpm 2-pole brushless induction motor for durability
• 90°C hot output temperature reached via powerful diesel-fired boiler
• Adjustable low pressure detergent suction and integrated 4.5ltr tank
• Total Stop function for reduced energy use and wear and tear
• 40ltr stainless steel tank for minimal cleaning interruption
• 3ltr detergent tank for added cleaning power for stubborn dirt
• High-quality 2-stage motor with bypass cooling for higher suction
• Robust pump for 198mtr³ airflow and a 2200mm water lift height
• Mounted on 4 non-marking rubber castors for simple mobility
• Lightweight and compact design for added portability
£25
• 10ltr high-quality multi-functional alkaline cleaner
• Designed for the SIP Electric Floor Scrubber Dryer range
• Ideal for heavy-duty and stubborn cleaning applications
• Perfect for use in more industrial settings
SIP
CW3000 PRO ELECTRIC
PRESSURE WASHER
PART NO: 08976
• 1740psi (120bar) max. pressure and 480ltr/hr flow rate
• Variable pressure output via a fitted adjustable regulator
• Heavy-duty brushless induction motor for increased durability
• Total Stop function for reduced energy use and wear and tear
• Extra-large wheels for easy movement over uneven terrain
• 8mtr hose and industrial steel lance with adjustable nozzle
SIP
TEMPEST P660/150
ELECTRIC PRESSURE
WASHER
PART NO: 08990
• 2175psi (150bar) max. pressure and 660ltr/hr flow rate
• Heavy-duty brushless induction for increased durability
• Total Stop function for reduced energy use and wear and tear
• Extra-large wheels for easy movement over uneven terrain
• 10mtr hose and reel and high-quality stainless steel lance
• 7.5ltr detergent tank for added cleaning power
£574 £872
£1,418
£357
76
SUSPENSION
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
SYKES PICKAVANT
BUSH REMOVAL AND
INSTALLATION TOOL
PART NO: 08797500
Tools
Specialised
• Complete kit for SUV, LCV, PSV,
HGV
• Contains 20x Press Sleeves in
2mm diameter steps
• Inside Diameter Range: 74 -
112mm in 2mm steps
• Outside Diameter Range: 84 -
SYKES PICKAVANT
UNIVERSAL SUSPENSION
ARM LEVER
PART NO: 08080000
• For lowering of the suspension arm and the separation of
suspension components
• Reduces the eort required, due to the unique design which uses
leverage and thetechnicians own bodyweight to create the force
required
• Adjustable, multi-position swing point allows for variable
applications “ both LH & RH
76 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
SYKES PICKAVANT
SPRING COMPRESSOR
PART NO: 385801SP
£2,096
SYKES PICKAVANT
4 WAY BALL JOINT SEPARATOR
CAR/ LCV APPLICATIONS
PART NO: 080500V2
• Unique 4-way lever design allows for a wide variety of applications
• 4 options are available, by removing the pin and selecting any of
the 4 positions
• Tapered, slim jaw fork design with tough, black epoxy coating
SPECIFICATION
• Jaw Opening: 24/ 30/ 40/ 45mm options
• Jaw Throat Width: 19mm
• Jaw Throat Depth: 30mm
SYKES PICKAVANT
BALL JOINT SEPARATOR
PART NO: 8070000
• Strong, heavy duty body, with
strengthened fork and lever,
allows for greater force to be
applied
• Can be upgraded to hydraulic
power (use 08075000
Upgrade Kit)
SPECIFICATION
• Jaw Opening: 70mm
• Jaw Throat Width: 36mm
• Jaw Throat Depth: 50mm
SYKES PICKAVANT
UNIVERSAL HUB PULLER
AND DRIVE SHAFT SET
BASIC
PART NO: GO010
• For pressing out
seized and bonded
drive shafts and also,
with the optional
Govoni slide hammer
GO421, for removing
the wheel hub
£52 £102
£506
£179
£1,268
77
WORKSHOP LIGHTING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
SERENCO
GEN2 7W COB SLIM LIGHT
WITH DIMMER SWITCH
GREEN
PART NO: SIN100.1070G
• Ultra low profile
• Patented 360º swivel ball joint
for flexible lighting in all areas
• Patented 180º folding hook and
SERENCO
DUAL POWER RIGHT ANGLE
FLASHLIGHT
PART NO: SIN-100.5000
• 2 Brightness Modes50 & 350 Lumen
• 90° Rotatable Head
• Integrated Pocket Clip
• Magnetic Base
• Durabledrop proof up to a height of
WORKSHOP LIGHTS
UNILITE
COMPACT CRI
WORKLIGHT
PART NO: CRI1250R
SERENCO
POWERHAND FLEXIBLE
HEAD SLIM LIGHT RED
PART NO: SIN100.2010R
• 1250 lumen 10W high CRI 96+
COB (Chip-on-Board) light
source
• Three coloured COB LED
options with CCT (Correlated
Colour Temperature) of 2700k,
4500k, and 6500k
• Press and hold function for
smooth dimming
• 250 lumen 3W SMD LED flood
beam top torch
• 5W UV LEDs on the front
(385nm) for specialized
applications
• Super bright COB technology
• 3-in-1 Flexible Slim Light
• 3 light settings: 300, 200, 80 Lumen
• Up to 6 hours runtime
• Reinforced USB - C charging socket for
longer life
• Charge indicator for convenience
• 3-stage switch to easily switch between
light settings
• Durable aluminium housing
• 180º flex-head
• Pocket clip for hands-free use when
folded
• Dual rear magnets for horizontal mounting
• Internally based magnets.
The UK-USB-PLUG
has a single USB
port to quickly
charge a Unilite
torch
UNILITE
UKUSBPLUG
PART NO: UK-USB-PLUG
£14
£30
£26
£33
£117
£30
£65
77
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
SERENCO
POWERHAND 2000 LUMEN
RECHARGEABLE UNDER
BONNET LIGHT
PART NO: SIN100.3019
MILWAUKEE
M18 FAP180502X
M12 UNDER HOOD LIGHT
NO BATTERIES OR CHARGER
PART NO: 4933459432
• Extendable 1.17m - 1.97m
• 3 Brightness Modes500, 1000 & 2000Lumen
• 360° Rotatable
• Protective Ergonomic Grips
• M12UHL-0 AREA LIGHT
• 2x the gripping surface
• High definition light output delivers consistent beam, optimised
colour temperature
UNDERHOOD
78
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
78
WORKSHOP LIGHTING
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
78 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
78 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
UNILITE
RECHARGEABLE FOLDING WORK LIGHT
PART NO: IL-175R
UNILITE
FOLDING INSPECTION LIGHT
PART NO: IL-925R
175 Lumen925 Lumen
• 175 lumen white COB LED at the front
• 150 lumen white COB LED at the rear
• 70 lumen SMD LED on top
• Compact pocket size with
SERENCO
800 LUMEN SLIMLINE
FOLDING WORK LAMP
WITH UV FUNCTION
PART NO: SIN-100.2045
• 3in1 design with 4 power modes
• UV Function for Air Conditioning
Leak Detection
• Slimline
• Aluminium Housing
• 180 degree Pivoting Head
• Magnetic base
FOLDING TORCH
UNILITE
ALUMINIUM LED
INSPECTION LIGHT
PART NO: PL-3
• High power 275 lumen white SMD LEDs
• Durable die-cast aluminium construction
• Rubberised micro-switch for easy control
• Strong magnetic base for hands-free placement
• Useful rear aluminium pocket clip for portability
• 925 lumen white COB LED at the front
• 475 lumen white COB LED at the rear
• 150 lumen SMD LED on top
• Compact hand-held size
UNILITE
RECHARGEABLE DUAL BEAM
HEADTORCH
PART NO: HT-650R
650 Lumen
• 650 lumen white
COB LED with a 6500k
colour temperature
• Circular COB LED for
wide flood lighting
SERENCO
HT104R
PART NO: HT104R
• 5W COB LED Striplight along front of adjustable headband with 3W
LED bulb on one side.
• COB Lumen Output: 350lm. LED Bulb Output: 120lm.
• Automatic sensor turns on and o when hand moved in front.
• • Operating Time: 2hr @ 100%, 6hr @ 30%.
£53
£47
£18 £30
£29
£27
HEADTORCH
79
HEALTH & SAFETY
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 79
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
SEALEY
HALF MASK WITH
A2P3R FILTER
CARTRIDGES
PART NO: 9360/66
Hi-Vis
SEALEY
A2P3R FILTER
CARTRIDGE
PACK OF 2
PART NO: 9366
Respiratory
Protection
SEALEY
HIVIS YELLOW JACKET
WITH QUILTED LINING &
ELASTICATED WAIST
SEALEY
FIRST AID
GRAB BAG
PART NO: SFA03
First Aid SEALEY
DELUXE EAR DEFENDERS
FOLDING
PART NO: SSP19F
Ears
SEALEY
SAFETY BASEBALL BUMP
CAP
PART NO:SSP16
Head
SEALEY
HARD SHELL GEL
KNEE PADS
PAIR
PART NO: 9711
Knees
LARGE
PART NO: 802L
£37
XTRA LARGE
PART NO: 802XL
£37
XTRA XTRA
LARGE
PART NO: 802L
£37
£45
£9
£14
£17
£33
£11
Respiratory
Protection
SAFETY
80
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
80
HEALTH & SAFETY
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
80 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
80 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
SEALEY
SAFETY
SPECTACLES
WITH EVA PADDING
CLEAR LENS
PART NO: SSP68
SEALEY
BROW GUARD WITH
FULL FACE SHIELD
PART NO: SSP11E
SEALEY
EYE/WOUND WASH
STATION
PART NO: EWS01
SEALEY
SAFETY
SPECTACLES
CLEAR LENS
PART NO: SSP66
SEALEY
SAFETY
SPECTACLES
ANTI-GLARE LENS
PART NO: SSP67
Eyes Eyes Eyes
SEALEY
EYE WASH
SAFE CONDITIONS SAFETY SIGN
- SELF-ADHESIVE VINYL
PART NO: SS58V1
SEALEY
ELECTRONIC
COMBINATION DEPOSIT
SAFE
PART NO: SECS01DS
SEALEY
ELECTRONIC
FIREPROOF SAFE
PART NO: SCFS04
SEALEY
KEY CABINET
50 KEY CAPACITY
PART NO: SKC50
SEALEY
ELECTRONIC KEY
CABINET
100 KEY CAPACITY
PART NO: SEKC100
SEALEY
KEY LOCK FLOOR
SECURITY SAFE
PART NO: SKFS01
SEALEY
KEY TAG ASSORTMENT
50 PIECE
PART NO: SKTAG50
£5
£2
£5
£16
£5
£26
£75
£65 £184
£6
£208 £83
SECURITY
81
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 81
WORKSHOP STORAGE
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 81
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 81
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
SEALEY
STEEL BODY SHROUDED
SHACKLE COMBINATION
PADLOCK
PART NO: PL603S
SEALEY
STEEL BODY
COMBINATION PADLOCK
LONG SHACKLE
62MM
PART NO: PL603L
SEALEY
BRASS BODY
PADLOCK
40MM
PART NO: PL101
SEALEY
SUPERLINE PRO® 4.9M STORAGE SYSTEM
STAINLESS STEEL WORKTOP
PART NO: APMSSTACK16SS
INCLUDES
• APMS64 - 7 Drawer Floor Cabinet 1360mm
• APMS52 - 2 Door Floor Cabinet 680mm
• APMS63 - Reel Cabinet 680mm
• APMS66 - Mobile Workshop Trolley
• APMS55 - Floor Cabinet Full Height 600mm
• APMS56 - Floor Cabinet 2 Door Full Height 915mm
• APMS54 - Wall Cabinet Tambour Front 680mm (x2)
• APMS65 - Wall Cabinet 2 Door 680mm
• APMS53 - Wall Cabinet 680mm (x2)
• APMS50BP - Back Panel 615mm (x5)
• APMS50UCD - Upright Connector Double (x4)
• APMS50UCS - Upright Connector Single (x2)
• APMS50SSB - Stainless Steel Worktop 1360mm
• APMS50SSC - Stainless Steel Worktop 2040mm
These items are heavy. Extra assistance must be provided at the delivery point to help its safe delivery
£6£53 £40
£3,832
TOOL STORAGE
82
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
82
WORKSHOP STORAGE
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
82 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
82 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
SEALEY
TOOL CHEST COMBINATION WITH
BALL-BEARING SLIDES
23 DRAWER
PART NO: AP52COMBO1
• Extra-wide tool chests designed to take our modular tool
trays.
• Topchest lid fitted with gas dampers for smooth opening
and closing.
• All heavy gauged steel construction and manufactured
with steel inner walls for extra strength and durability.
• Heavy-duty 45mm ball-bearing drawer slides provide
superior performance and carry heavier loads.
• Full height rear locking mechanism, locks full-length
drawers in multiple locations.
• Added security provided by cylinder locks. Supplied with
two keys.
• Rust and solvent resistant powder coat paint finish.
• Each drawer features stylish aluminium drawer pulls and
non-slip liners.
• Fitted with four extra-heavy-duty Ø125mm PU/PP alloy
wheels, two castors with large toe locks and two fixed
wheels.
SEALEY
3.2M SUPERLINE PRO® STORAGE SYSTEM
STAINLESS WORKTOP
PART NO: APMSSTACK03SS
• Tough and durable construction with a hammered metal finish.
• Aluminium handles and drawer pulls.
• Drawers fitted with ball-bearing drawer slides.
• 38mm stainless steel worktop.
• Gas struts on wall cabinet doors.
• 5 Year guarantee
INCLUDES
• APMS55 - Modular Floor Cabinet Full Height 600mm (x2)
• APMS54 - Modular Wall Cabinet Tambour Front 680mm
• APMS53 - Modular Wall Cabinet 680mm (x2)
• APMS59 - Modular 5 Drawer Cabinet 680mm
• APMS58 - Modular 5 Drawer Mobile Cabinet 650mm
• APMS52 - Modular 2 Door Floor Cabinet 680mm
• APMS50BP - Modular Back Panel 615mm (x3)
• APMS50UCD - Modular System Upright Connector Double (x2)
• APMS50UCS - Modular System Upright Connector Single (x2)
• APMS50SSC - Stainless Steel Worktop 2040mm
INCLUDES
• AP5210T - Topchest 10 Drawer with Ball-Bearing Slides - Red
• AP5213T - Rollcab 13 Drawer with Ball-Bearing Slides - Red
• 5 Year guarantee*.
£2,590
£1,747
83
WORKSHOP STORAGE
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 83
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
GYS
SUPERLINE PRO® 1.6M CORNER STORAGE SYSTEM
STAINLESS WORKTOP
PART NO: APMSSTACK08SS
INCLUDES
• APMS50BP - Modular Back Panel 615mm (x2)
• APMS50SSA - Stainless Steel Worktop 680mm (x2)
• APMS50UCD - Modular System Upright Connector Double (x2)
• APMS50UCS - Modular System Upright Connector Single (x4)
• APMS62 - Modular 7 Drawer Cabinet 680mm
• APMS53 - Modular Wall Cabinet 680mm (x2)
• APMS57 - Modular Cabinet Multifunction 680mm
• APMS60 - Modular Corner Floor Cabinet 865mm
• APMS60BP - Back Panel for Modular Corner Unit (x2)
• APMS60SS - Stainless Steel Worktop for Modular Corner Cabinet
865mm
• APMS61 - Modular Corner Wall Cabinet 865mm
SEALEY
MOBILE WORKSTATION
10 DRAWER
PART NO: AP5210BE
• BUILT TO LAST - Heavy-duty steel construction and manufactured
with steel inner walls for extra strength and durability.
• MOBILE - Fitted with four Ø125mm PP wheels with black chrome
eect alloys, two fixed and two swivel with brakes.
• STYLISH - Rust and solvent resistant black crinkle eect finish with
anodized black drawer and cupboard handles.
• WORKTOP - Supplied with 25mm thick rubber wood worktop.
• STORAGE - 10 Soft close drawers on 45mm ball bearing slides, two
cupboard and pegboard back panel.
• SECURE - Drawers and cupboard fitted with cylinder locks and
each supplied with two keys.
• Some simple assembly required.
• 5 Year Guarantee*.
£1,503
£2,231
84
WORKSHOP STORAGE
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
84 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
GYS
HEAVY-DUTY STEEL ADJUSTABLE
WORKBENCH WITH STAINLESS STEEL
WORKTOP
1830MM
PART NO: APMS23
GYS
MOBILE STORAGE SYSTEM
22 BIN
PART NO: TPS22
SEALEY
STAINLESS STEEL MOBILE TOOL
CABINET 4 DRAWER
PART NO: AP4804SS
• Anti-fingerprint stainless steel construction.
• Supplied with a 25mm thick wooden worktop.
• Four drawers with 45kg capacity each.
• Each drawer features aluminium pull handles and non-slip liners.
SEALEY
RETRO STYLE
TOPCHEST, MID-BOX
& ROLLCAB
COMBINATION BLUE/
WHITE STRIPES
10 DRAWER
PART NO: AP28COMBO2BWS
SEALEY
MOBILE TROLLEY WITH WOODEN WORKTOP,
HUTCH, 2 DRAWER RISER & SIDE LOCKER
15 DRAWER 1549MM
PART NO: AP6115BECOMBO2
• All heavy-duty steel construction and manufactured with steel
inner walls for extra strength and durability.
• Full height rear locking mechanism, locks smooth running soft
close drawers in place.
• Hutch style top chest features gas struts, single full-length
powder coated shelf and pegboard back for easy tool storage.
Pegboard is compatible with all Sealey TTS hooks.
• Hutch is supplied with a power strip (4 x 230V, 2 x 5V 2.4A USB
sockets) which can be easily installed where needed as well as
• Retro style topchest, mid-box and
rollcab with modern day functionality.
• Ball-bearing drawer slides.
• 'Lift & Latch' drawer pulls prevent
inadvertent opening.
• EVA non-slip drawer liners.
• Fully lockable, supplied with two keys.
• Powder coated steel rack with twenty-two robust composite
storage bins evenly spread across five shelves.
• Mounted on heavy-duty castors (two lockable) for mobility.
• Unit can hold up to a maximum weight of 60kg evenly spread
• Manufactured from heavy gauge powder coated steel and is at
the top end of our range with a weight capacity of 1000kg (evenly
distributed).
• Adjustable leg extensions allow worktop height to range from 680-
1030mm.
£4,300
£1,137
£289
£684
£818
85
WORKSHOP STORAGE
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 85
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
SEALEY
3-LEVEL WORKSHOP TROLLEY
PART NO: CX108
SEALEY
WORKBENCH WITH DRAWER
1.2M
PART NO: AP12160
SEALEY
STAINLESS STEEL WORKBENCH
2.1M
PART NO: AP2184SS
SEALEY
2-LEVEL COMPOSITE
HEAVY-DUTY TROLLEY
PART NO: CX204
SEALEY
WORKSTATION WITH 3 DRAWERS
& 2 CUPBOARDS
PART NO: AP1905C
SEALEY
STEEL WORKBENCH WITH
WOODEN TOP
1.53M
PART NO: AP1535
• Ideal for regularly used workshop items such as body repair kits,
power tools and bulky equipment too big for a tool chest.
• Strong build quality and extra-large castors also makes
this an excellent dismantling trolley for smaller vehicle
components.
• Heavy-duty garage and workshop trolley with 80kg capacity per
shelf.
• Manufactured from extra-strong impact resistant plastic.
• Ideal for a variety of applications.
• One-piece moulded shelves prevents spills transferring to lower
• Boltless design makes the unit easy to assemble, with minimal tools
being required.
• One large drawer with ball-bearing slides, fitted with two
handles.
• MDF Worktop measures 1210 x 605mm (W x D), and has a
• Fully painted steel frame with wooden worktop and shelf.
• No nuts and bolts, means no tools required to assemble.
• Workbench clips together in minutes.
• Overall Size (W x D x H): 1535 x 620 x 920mm.
• Maximum Capacity Per Level: 200kg (evenly distributed).
• 2-Level mobile tyre rack helps keep working area clear.
• Tyre storage/transport dolly ideal for use with up to eight tyres.
• Four Ø75mm swivel TPR castors, one featuring a brake providing
smooth and quiet manoeuvrability around the workplace.
• Overall Size (W x D x H): 640 x 640 x 110mm.
• 2-Level mobile tyre rack helps keep working area clear.
• Overall Size (W x D x H): 640 x 640 x 110mm.
• The dolly has a capacity of 136kg.
• Tyre storage/transport dolly ideal for use with up to eight tyres.
• Four Ø75mm swivel TPR castors, one featuring a brake providing
£110 £116
£126 £722
£321 £142
86
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
86
TYRE STORAGE
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
86 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
86 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
SEALEY
PUSH-TO-OPEN ROLLCAB 7 DRAWER
PART NO: APPD7O SEALEY
2-LEVEL TYRE RACK
200KG CAPACITY PER LEVEL
PART NO: STR600
SEALEY
2-LEVEL MOBILE TYRE RACK
200KG CAPACITY PER LEVEL
PART NO: STR007
SEALEY
2-LEVEL TYRE RACK
200KG CAPACITY PER LEVEL
PART NO: APR3001
SEALEY
TYRE STORAGE/TRANSPORT DOLLY
PART NO: STR006
SEALEY
WALL OR FLOOR MOUNTING
EXTENDING TYRE RACK
PART NO: STR001
TYRE STORAGE
• 2-Level mobile tyre rack helps keep working area clear.
• Tyre storage/transport dolly ideal for use with up to eight tyres.
• Four Ø75mm swivel TPR castors, one featuring a brake providing
smooth and quiet manoeuvrability around the workplace.
• Overall Size (W x D x H): 640 x 640 x 110mm.
• The dolly has a capacity of 136kg.
• 2-Level mobile tyre rack helps keep working area clear.
• Wall or floor mounting tyre rack helps keep work area tidy.
• Steel construction with a powder coated finish giving corrosion
resistance.
• Adjustable width to suit space available.
• Designed to meet
the requirements of
the most demanding
professionals.
• This shelving/
racking system is
especially suited for
storage solutions
in the workshop,
bodyshop,
• 2-Level mobile tyre rack
helps keep working area
clear.
• Unit is on wheels for easy
manoeuvrability when
needing to take the tyres to
point of work ideal for use
track side.
• Steel construction with a
powder coated finish giving
corrosion resistance.
• Stores up to 12 tyres, 6 per
level, with a total capacity of
400kg (200kg/Level).
• Overall Size (W x D x H): 915 x
455 x 1700mm.
• 2-Level static tyre rack
helps keep working
area clear.
• Stores up to 26 tyres,
13 per level, with a
total capacity of 400kg
(200kg/Level).
• Steel construction
with a powder coated
finish giving corrosion
• Constructed from heavy
gauged steel with steel
inner walls for extra
strength and durability.
• Heavy-duty 45mm
ball-bearing drawer
slides provide superior
performance and carry
heavier loads.
• Fitted with Ø125mm
castors with black chrome
hubcaps, two swivel
locking castors and two
fixed.
£609
£337
£252
£422
£45 £162
87
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
POWER TOOLS
87
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
MILWAUKEE
M12 FPP2H-622P
M12 FUEL™ AUTOMOTIVE
POWERPACK
PART NO: 4933471743
MILWAUKEE
M18 FPP2AI-502B
M18 FUEL™ HIGH TORQUE IMPACT
WRENCH & GREASE GUN KIT
PART NO: 4933472104
£375
£479
£350
£441
MILWAUKEE
M18BLPP2A2-502X
POWER PACK
PART NO: 4933492642
MILWAUKEE
M12 FPP2BA-202B
M12™ COMBI DRILL & MULTI
TOOL KIT
PART NO: 4933478987
Tools For
Every Job
TOOL KIT
• M12FIR38 ⁄ Ratchet
• M12FIWF38 ⁄ Impact Wrench
• 1 x M12B6 12V 6.0AH Battery
• 1 x M12B2 12V 2.0 AH Battery
• 1 x C12C 12V
• M18FHIWF12
• M18GG
• 2 x 5.0Ah Batteries
• 1 x M12-M18 FC charger
• M12 FMT
• M12 FPD
• 2 x M12 B2 Battery packs
• C12 C Charger
• M18FPD3 - Drill/Driver
• M18FSAGV115X - Angle grinder
• 2 x 5.0Ah batteries
• M12-18FC Charger
• 2 x HD boxes
88
AIR CONDITIONING
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
POWER TOOLS
88 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
88 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
MILWAUKEE
M12FIR14201B
M12 FUEL ⁄” RATCHET
WITH BATTERY & CHARGER
PART NO: 4933459901
MILWAUKEE
M12FIR38LR0
M12 FUEL ⅜” EXTENDED
REACH RATCHET
NO BATTERIES OR CHARGER
PART NO: 4933471500
MILWAUKEE
M12FHIR38201B
M12 FUEL HIGH
SPEED RATCHET
⅜” KIT
PART NO: 4933478809
MILWAUKEE
M18 BLPP2A2502X
M18 BRUSHLESS COMBO KIT
PART NO: 4933464523
MILWAUKEE
M12FIR38201B
M12 FUEL ⅜”
RATCHET KIT
PART NO: 4933459799
MILWAUKEE
M12IR201B
M12™ COMPACT ⅜”
IMPACT RATCHET KIT
PART NO: 4933448110
RACHET
Carry Bag Carry Bag
• 1 x 2.0Ah battery
• ⁄’’ to ¼ Adaptor
• C12C charger
• M18BLPD2
• M18BLID2
• 2 x M18 5.0Ah Batteries
• 1 x M12-18FC
• 1 x HD Box
• 1 x 2.0Ah battery
• ⁄’’ to ¼’’ Adaptor
• C12C charger
• 1 x 2.0Ah battery
• ¼’’ to ⁄’’ Adaptor
• C12C charger
• 2x 2.0Ah li-ion batteries
• C12 C charger
• 8 / 9 / 10 /11 / 12 / 13 / 14 / 15 mm pass-through sockets, 16 / 17 / 18 /
19 / 21 mm sockets, 1/4" anvil adapter, ⁄" anvil adapter, ⁄" hex bit
holder & socket rail• ⁄’’ to ⁄’’ Adaptor Included
MILWAUKEE
M12FPTR202X
M12 ⅜” PASSTHROUGH RATCHET
WITH BATTERY & CHARGER
PART NO: 4933480755
£542
£181
£198
£161
£323
£121
£181
• 1 x 2.0Ah battery
• C12 C charger
89
AIR CONDITIONING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 89
AIR CONDITIONING
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
POWER TOOLS
89
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 89
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 89
MILWAUKEE
M18 FUEL 1” HIGH
TORQUE DHANDLE
IMPACT WRENCH
Part No: 4933471757
MILWAUKEE
M18 ONEFHIWF12502X
M18 ONEKEY™ HIGH
TORQUE IMPACT WRENCH
WITH FRICTION RING ½”
RECEPTION KIT
PART NO: 4933459728
MILWAUKEE
M12 FUEL™
SUB COMPACT ½”
IMPACT WRENCH
NO BATTERIES OR CHARGER
PART NO: 4933464615
Recommend
Rubber Boot
Protector
HD Box
Carry Case
MILWAUKEE
M12 FIW38202B
M12 FUEL™ ⁄” IMPACT
WRENCH KIT
PART NO: 4933478785
IMPACT WRENCH
MILWAUKEE
M12FIR380
M12 FUEL ⅜” RATCHET
NO BATTERIES OR CHARGER
PART NO: 4933459797
MILWAUKEE
M12FIR120
M12 FUEL ⁄” RATCHET
NO BATTERIES OR CHARGER
PART NO: 4933459800
• 2 x 5.0Ah battery
• 1 x M12-18 FC
• ⁄’’ to ⁄’’ Adaptor Included
• Naked - no batteries or
charger - ⁄’’ to ⁄’’ Adaptor
Included
• 2 x 2.0Ah batteries
• Charger
• Up to 339Nm of maximum torque
• Brushless POWER STATE™ motor
• Digital overload protection
• Supplied with 1 x battery
• Mode 4 bolt removal, provides a
maximum nut-busting torque of 2711Nm
• ONE-KEY tool control enables wireless
MILWAUKEE
M18 FHIWF12503X
M18 FUEL™ IMPACT
WRENCH WITH FRICTION
RING ½” RECEPTION KIT
PART NO: 4933471259
MILWAUKEE
M18 FIW2F380X
M18 FUEL™ COMPACT
IMPACT WRENCH WITH
⁄” FRICTION RING
NO BATTERIES OR CHARGER
PART NO: 4933478650
Recommend
Rubber Boot
Protector
Dynacase
• Includes 3 x M18 batteries,
1 x charger
• Compact size of 213mm
• 4-Mode drive control
• Delivers 1356Nm
• The most compact cordless impact
wrench in its class, delivering the
most access in tight spaces, with
performance at 339 Nm of fastening
torque
£133
£409
£836
£442
£132
£169
£112
£126
90
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
90 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
MILWAUKEE
M12 FUEL ⁄" IMPACT
WRENCH WITH
FRICTION RING
PART NO: 4933464612
MILWAUKEE
M12 FUEL RIGHT ANGLE
IMPACT WRENCH ⁄" KIT
M12 FRAIWF38622X
PART NO: 4933478808
MILWAUKEE
M12 FIWF12622X
M12 FUEL™ ⁄” IMPACT
WRENCH WITH
FRICTION RING KIT
PART NO: 4933464617
MILWAUKEE
M18 COMPACT ONE
KEY FUEL ⁄"
IMPACT WRENCH
PART NO: 4933451153
MILWAUKEE
M18 ONEKEY FUEL
IMPACT WRENCH
NO BATTERIES OR CHARGER
PART NO: 4933459729
HD Box
• 1 x 6ah battery
• 1 x 2ah battery
• 1 x c12 c charger
• Delivers up to 270 Nm fastening torque
and 300 Nm nut-busting torque
• 4-Mode DRIVE CONTROL includes Auto
Shut-O Mode and Bolt Removal Mode
• The long body profile allows for more
access in hard to reach spaces
• Only 71 mm head profile design allows
• The M18 FUEL™ high torque impact
wrench delivers 1627 Nm of
fastening torque in a compact size
of 213 mm
• The 4 -Mode DRIVE CONTROL
allows the user to shift into four
dierent speed and torque settings
• Up to 339 Nm of maximum torque
• ⅜˝ anvil with friction ring for quick
and easy socket changes
• Brushless POWERSTATE™ motor
delivers more power in a more
• M18 FIWF12 ONE-KEY™ technology
• Connect via Bluetooth
• Save up to 4 custom settings to the
tools memory for fast selection on
the jobsite
• Control speed, torque, start - end
speeds and LED light
• Compact design at only 152
mm in length
• ⅜˝ square friction ring
• Auto shut-o control applies
no more than 47 Nm of torque
for hand-tight fastening
MILWAUKEE
M18™ FUEL™ COMPACT
IMPACT WRENCH WITH
½” FRICTION RING
NO BATTERIES OR CHARGER
PART NO: 4933478443
MILWAUKEE
M18 FMTIW2F12502X
M18 GEN 2 FUEL™
MIDTORQUE IMPACT
WRENCH WITH ½’’
FRICTION RING KIT
PART NO: 4933478451
Dynacase HD Box
• All new Tri-LED Lighting
• Compact design at only 124mm in length
• Power eciency under load - outstanding
torque of 339Nm
• Includes charger, 2 x M18
batteries
• All new Tri-LED Lighting
• Compact design at only
152mm in length
Top Tool
MILWAUKEE
M18 MIDTORQUE
IMPACT WRENCH ⁄"
2 X 5.0AH BATTERY
PART NO: 4933479405
£140
£335
£238
£102
£325
£208
£258
£126
91
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 91
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
MILWAUKEE
M12 FUEL ⁄" IMPACT WRENCH WITH
FRICTION RING KIT
PART NO: 4933464614
• Up to 339 Nm of maximum torque
• ⅜˝ anvil with friction ring for quick and easy socket changes
• Better access in tight spaces with an overall length of only
121.9 mm
• 4-Mode DRIVE CONTROL with auto-shut o mode, oers the
user precise control
• Bright LED workspace illumination
• Comes with HD Box Charger and Battery
MILWAUKEE
M18 FSAGV115XPDB0X
M18 115MM VARIABLE SPEED &
BRAKING ANGLE GRINDER WITH
PADDLE SWITCH
NO BATTERIES OR CHARGER
PART NO: 4933478773
MILWAUKEE
M18 FSAGV115XPDB0
M18 FUEL™ 115MM
BRAKING VARIABLE SPEED
SMALL ANGLE GRINDER
NO BATTERIES OR CHARGER
PART NO: 4933478774
MILWAUKEE
M12 FDGA422B
M12 FUEL™ ANGLED DIE
GRINDER KIT
PART NO: 4933471440
MILWAUKEE
M12 FDGS422B
M12 FUEL™ STRAIGHT
DIE GRINDER KIT
PART NO: 4933471437
MILWAUKEE
M12 FUEL ANGLED DIE GRINDER
NO BATTERIES OR CHARGER
PART NO: 4933471438
MILWAUKEE
M18FSAGF125XPDB0X
M18 FUEL 125MM BRAKING FLATHEAD
SMALL ANGLE GRINDER
NO BATTERIES OR CHARGER
PART NO: 4933478439
Bag Bag
ANGLE GRINDER
• Speed dial for maximum
control
• RAPIDSTOP™ for fastest
• Compact size
• 4-Mode speed control
• To be used with discs up to
50mm
• Supplied with 6 and 8 mm collets
• ¼” & ⁄” Collets
• 1 x 4.0Ah battery
• 1 x charger
• 1 x 2ah battery
• ¼” & ⁄” Collets
• 1 x 4.0Ah battery
• 1 x charger
• 1 x 2ah battery
No Box
£214
£145 £140
£338
£209 £261
£133
92
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
92
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
92 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
92 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
HD Box
HD BoxHD Box MILWAUKEE
M18 BPD-402C
M18™ COMPACT
PERCUSSION
DRILL KIT
PART NO: 4933443518
MILWAUKEE
M12SI-0 SOLDERING IRON
BARE UNIT
PART NO: 4933459760
MILWAUKEE
M12 SUB COMPACT
PERCUSSION DRILL KIT
PART NO: 4933443889
MILWAUKEE
M18™ BRUSHLESS
PERCUSSION DRILL
PART NO: 4933464518
Kit Box
DRILLS
• 3 locking head positions
• Tool free replaceable tips
• Dual colour LED
• Quick heat up time: the tool is ready to use in 20 - 30
seconds
• 3 locking head positions to work in multiple
orientations - 0°, 45°, 90°
• Supplied with 2 x batteries
• Measuring only 180mm in length
• Advanced 13mm heavy duty metal chuck
• LED light
£218
£314
£68
£103
£244
• 1 x charger
• Supplied with 2 x
batteries
• Metal chuck
• 2-speed setting
• LED light
• Supplied with
2 x batteries
• Compact percussion drill
measuring only 198mm in
length
SOLDERING IRON
MILWAUKEE
M18 VC2-0
M18™ VACUUM
NO BATTERIES OR CHARGER
PART NO. 4933464029
VACUUM
93
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 93
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 93
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 93
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
MILWAUKEE
M18 FHZ-0X
M18 FUEL™ HACKZALL
NO BATTERIES OR CHARGER
PART NO: 4933459887
MILWAUKEE
CUT OFF TOOL
NO BATTERIES OR CHARGER
PART NO`: 4933464618
MILWAUKEE
M18 BMT-0X
M18™ COMPACT MULTI TOOL
NO BATTERIES OR CHARGER
PART NO: 4933446203
MILWAUKEE
C12 RT-0
M12™ COMPACT ROTARY
TOOL
NO BATTERIES OR CHARGER
PART NO: 4933427183
MILWAUKEE
M18 SAWZALL
NO BATTERIES OR CHARGER
PART NO: 4933447275
MILWAUKEE
HACKZALL BLADE
SET 1-10 PIECE
PART NO: 49220220
Accessories
• Fast accurate cutting with up to 20,000 RPM
• Multi-material cutting capability
• Optimised for one-handed use
• Compact, one-handed design
• LED light
• Quik-lok blade clamp
• Versatile cordless solution for cutting
• Variable speed (5000 - 32,000 rpm)
• 3.2mm collet fits most current accessories in the market
• Up to 50% faster and versatile cordless solution for cutting
• 12 variable speed settings from 12,000 - 18,000 orbits per minute
• Brightest LED workspace illumination
• Especially engineered blades for exclusive use on 12 V
HACKZALL™.
• Bi-Metal construction for increased tooth durability.
• Optimised tooth form for aggressive and faster cutting.
• Thinner blade body for better speed of cut and up to 35% more
cuts per charge vs. standard Bi Metal blades.
• High performance Reciprocating Saw
• REDLINK™ overload protection electronics
• Patented FIXTEC™ clamp for fast and easy keyless blade change
• Counter balance mechanism to reduce vibrations 15.2 m/s² in
wooden beams
HD Box
£155
£63
£192
£194
£20
£112
CUTTER
94
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
94
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
94 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
94 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
MILWAUKEE
M18 FAP180-0
M18 FUEL™ POLISHER
NO BATTERIES OR CHARGER
PART NO: 4933451549
MILWAUKEE
M18 FAP180-502X
M18 FUEL™ POLISHER KIT
PART NO: 4933451551
• 1 x 4Ah battery
• 1 x 2 Ah battery
• 1 x c12 c charger
• 2 x 5.0Ah batteries
• Charger
• Variable speed selection ranging from 360-2200RPM
• Removable dust protection guard
• World´s first cordless polisher with 8 position variable speed
selection, 3 position bale handle
MILWAUKEE
M12 FUEL TYRE BUFFER
NO BATTERIES OR CHARGER
PART NO: 4933472215
HD Box
A must for Tyre
Workshops
• Two-speed mode selector for reaming & bung applications
• ⁷⁄₁₆˝ quick change chuck
• Variable speed trigger
• On board fuel gauge and LED light
MILWAUKEE
M18 CBLPP2F-302X
SHOCKWAVE™ BIT SET
31 PIECE GBX
PART NO GEQ4932472060
MILWAUKEE
METAL DRILL BITS HSS
19 PIECE
PART NO: 4932352468
MILWAUKEE
METRIC COMBI
SPANNER SET
15 PIECE
PART NO: 4932451568
NEW Top Seller
MILWAUKEE
METRIC COMBI
SPANNER SET
15 PIECE
PART NO:4932464258
QualityGreat Price
• Chrome alloy steel, chrome plated
• MAX BITE™ open-end grip reduces rounding and stripping
• Rounded I-Beam handle for comfortable handling grip
• Ink-filled labels for clear visibility
• Lifetime warranty
• This HSS-R metal drill bit
set features 19x high speed
steel rollforged metal drill
bits produced according to
DIN 338, supplied in a heavy
duty metal case. N/mm².
• Laser hardened Wear Guard™
Tip
• Shock Zone™ geometry
designed to flex and reduces
stress at the tipx
• Colour coded for easy identification
• Made from high quality alloy steel
for strength and durability
• Set includes ½˝ impact sockets of
17mm, 19mm and 21mm length
MILWAUKEE
M12BPS-421X
M12 SUB COMPACT
POLISHER/SANDER K
PART NO: 4933447802
Great All
Rounder
£188 £179
£112
£23
£403
£13
£13 £90
POLISHER
HAND TOOLS
95
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 95
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 95
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 95
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
315KG
TOTAL WEIGHT
CAPACITY
MILWAUKEE
40” STEEL WORK CART
PART NO: 4932478857
MILWAUKEE
M12 B2
M12™ 2.0AH
REDLITHIUM-ION™
BATTERY
PART NO: 4932430064
MILWAUKEE
M12 6.0
REDLITHIUM-ION™
BATTERY
PART NO: 4932451395
MILWAUKEE
M18 B5
M18 5.0AH
REDLITHIUM-ION™
BATTERY
PART NO: 4932430483
MILWAUKEE
M12™-M18™
MULTI FAST
CHARGER
PART NO: 4932451080
• 45kg rated soft-close drawers
• 90kg rated sliding bottom shelf
• V-grooves to hold material when cutting or
measuring
• Foldable rear shelf with 22 kg weight
capacity
• 2 moveable shelves for storing bottles,
sprays and other equipment
• Magnetic power strip allows to charge
batteries directly on the cart
• 125mm industrial casters (2x fixed, 2x
swivelling with brakes)
£545
£25
£70
£52
£49
96
HAND TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
LASER
TIMING TOOL KIT
FOR JLR 2.0 DIESEL
AJ200
PART NO: 7430
96
LASER
ENGINE TIMING
TOOL KIT
FOR VAG 1.0, 1.2, 1.4L
PART NO: 6586
LASER
ENGINE TIMING
TOOL SET
FOR VAUXHALL/OPEL
PART NO: 5902
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
LASER
ENGINE TIMING KIT
FOR FORD 2.0 ECOBLUE
DIESEL
PART NO: 7323
LASER
ENGINE
TIMING KIT
FOR PSA, VAUXHALL/
OPEL 1.0, 1.2
PART NO: 6200
LASER
CAMBELT TIMING
TOOL KIT
FOR FORD 1.0 GTDI
PART NO: 6952
LASER
ENGINE TIMING
TOOL SET
FOR VAG 1.4, 1.6, 2.0I
TDI CR
PART NO: 6809
£72
• Designed for the latest Ford 2.0D
EcoBlue TDCi engine which features an
innovative “belt in oil” design where
the synchronous drive belt is sited
inside the oiled area of the engine.
• Designed for the latest Ford
2.0D EcoBlue TDCi engine which
features an innovative “belt in oil” design where the synchronous
drive belt is sited inside the oiled area of the engine.
• Developed for the 2.0L diesel engine from JLR.
• The kit contains all the essential components required to lock the
new JLR 2.0L “Ingenium” diesel engines in their “timed” position so
that the engine timing chain can be safely removed and replaced
and/or the engine timing checked.
• Designed to lock the cam and
crankshafts in position to allow the removal and replacement
of the timing chain fitted to Vauxhall/Opel twin cam engines.
• Designed to hold the camshafts and crankshaft in their timed
position during belt replacement on Citroën, DS, Peugeot and
Vauxhall/Opel EB0 and EB2 1.0L and 1.2L 3 cylinder engines.
• Applications include: Citroën, DS, Peugeot and Vauxhall/Opel
models.
• This kit is for the FSI VAG petrol
engines fitted to Audi, Seat, Skoda and Volkswagen
models including the 1.4L cylinder on demand (CoD) engine
• Camshaft locking tools required for the 1200cc 6 and 12 valve
engines used in Seat, Skoda and Volkswagen (2002 to 2015).
• A comprehensive kit for the removal
and fitting of the cambelt on popular 1.4, 1.6
and 2.0L VAG diesel engines fitted across the range.
• Also includes 2 pins for the gears in the cylinder head.
£175
£232
£150
£137
£138
£161
£90
LASER
TIMING TOOLS
FOR VAG 3CYL 6 &
12 VALVE
PART NO: 4083
SPECIALISED TOOLS
97
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 97
HAND TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
LASER
SOCKET SET ⁄"D
58 PIECE
PART NO: 56017
LASER
MINIATURE
COMBINATION
SPANNER SET
3.2 5.5MM | 6 PIECE
PART NO: 7265
LASER
COMBINATION SPANNER SET
6 32MM | 25 PIECE
PART NO: 6396
LASER
ULTRA THIN OPEN ENDED SPANNER SET
10 PIECE
PART NO: 6996
• A comprehensive metric spanner set in both regular and stubby
lengths
• Also features a set of double ended Star profile spanners from E6
to E24.
• A comprehensive set of metric combination Bi-Hex (12pt) spanners
• Sizes: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
25, 26, 27, 28, 30 & 32mm.
• Comprehensive set of 25 Bi-Hex (12pt) combination spanners in a
fully polished finish.
• Value set of metric combination spanners manufactured from
chrome vanadium with a satin finish and polished jaws. A useful
medium sized set that includes every size from 8mm to 19mm
LASER
COMBINATION
SPANNER SET
8 19MM | 12 PIECE
PART NO: 1798
• A complete set of double ended, ultra-thin open-ended
spanners, from 6mm to 24mm, ideal when space is restricted
• Contents: 6 x 7mm (2.1mm thick); 8 x 9mm, 10 x 11mm (2.5mm thick); 12 x 13mm, 14 x
15mm (3.5mm thick); 16 x 17mm (4.5mm thick); 18 x 19mm (4.5mm thick); 20 x 22mm
(5.2mm thick), 21 x 23mm, 22 x 24mm (5.5mm thick).
• Single Hex sizes (6pt): 3.2, 3.5, 4, 4.5, 5mm.
Length: 100mm.
• Bi-Hex size (12pt): 5.5mm. Length: 100mm.
LASER
METRIC COMBINATION SPANNER SET
25 PIECE
PART NO: 8717
LASER
METRIC/STUBBY/STAR SPANNER SET
30 PIECE
PART NO: 8481
£12
£47
£12
£48
£61
£43
£83
SOCKETS & SPANNERS
• Includes deep, standard and
star sockets, star and Hex
bits; driver bit set
• Manufactured from Chrome
Vanadium.
97
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 97
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
98
HAND TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
SYKES
VIBRO IMPACT AIR HAMMER
PART NO: 90206000SP
• A unique concept to aid the removal of seized suspension parts
• The Vibro-Impact system allows for the controlled application of
force via an air powered Impact Hammer
• Allows the operator to control and gradually increase the force
being applied, in order to loosen seized components
• Features a built-in shock-absorber in order to minimise risk of
damage if too much pressure is accidentally applied. Low vibration
for user comfort
GENERAL TOOLS
£343
98 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
• Heavy duty ⁄” drive socket set with Metric and AF sockets plus
essential accessory set in metal storage case, manufactured from
Chrome Vanadium with a fully polished finish.
LASER
KAMSA SOCKET SET ⁄"D
26 PIECE
PART NO: SS4985
£167
SYKES
UPDATED MASTER COOLING KIT
PART NO: 331595V3
SYKES
RING PLIERS
PART NO: GO829
SYKES
WIRELESS
STETHOSCOPE KIT
CAR/LCV KIT
PART NO: 30047500
SYKES
BRAKE PIPE
FLARING TOOL
KIT
COMPLETE
PART NO: 2700800
• Locking Pliers supplied with 4 sets of interchangeable clamps for
tightening the snap ring on the transmission shaft.
• There pliers ensure mounting without risk of damage to the rush
(clips) of the teeth when inserting the bowl on the transmission
shaft.
• 270 Series Brake Pipe Flaring
Tool Kit
• SAE Single & Double Flares: ⁄,
⁄, ⁄, ⁄, ⁄, 4.75, 6, 8, 10, 12mm
• DIN Single Flares: 4.75mm
• Bench Mounted
• Designed for the detection of vehicle
noises e.g. rattles, squeaks and air
ingress under load, during a road test
and for the diagnosis of a wide variety
of potential faults e.g. wheel bearings,
CV joints, dierentials, transmission,
injectors, alternators, water pumps, AC
compressors and many more.
• Pick-up clamps can be attached to
• Provides an eective
solution when pressure testing
the cooling system to help locate internal & external leaks
• Suitable for modern vehicles with in-built overflow at the top of
expansion tank
£350
£385
£427
£259
99
HAND / EV TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
LASER
EV INSULATED TOOL KIT
3 DRAWER TOOLBOX | 27 PIECE
PART NO: 8328
Great Starter Kit
• Robust 3 drawer tool box (510
x 230 x 265mm) contains a
selection of fully insulated
tools to suit the needs of any
mechanic working on hybrid
and electric vehicles
£321
£173
£142
£167
99
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
SYKES
INDUSTRIAL PUMP
SPRAYER
1LTR
PART NO: SPEEDLINE1001
SYKES
MASTER HUB PULLER
PLATE KIT
PART NO: 8522500
SYKES
UNIVERSAL PRESS & PULL SLEEVE KIT
CAR/LCV KIT
PART NO: 8780000
SYKES
8" MECHANICS VICE
PART NO: 53320800
• A universal system for the removal and installation of Suspension
Bushes, Bearings, Seals et
• By selecting the appropriate diameter sleeves, the bush/bearing/
seal is ˜Pressed, or ˜Pulled by the action of turning the spindle nuts
• Universal hub puller plate with 8 slots for
maximum coverage
• Full kit with all options
• Hydraulic/slide hammer/force screw
• Unbreakable vice* *Excluding handle & jaws
• High quality, heavy duty construction provides years of trouble free
use
• CNC machined components for excellent fit and durability
• Hardened and tempered finely ground jaws for superior grip
• 1 litre industrial pump sprayer
• Suitable for various chemicals e.g.
detergents, solvents, brake cleaner
andgeneral cleaning agents*
• Polythene body with pressure relief
valve
£17
£113
£295
£535
LASER
VDE INSULATED TORQUE
WRENCH ⁄"D 20100NM
PART NO: 8322
LASER
VDE INSULATED TORQUE
WRENCH ⁄"D 630NM
PART NO: 8320
• A fully insulated click type torque wrench
• Manufactured to IEC60900 standards for 1000vAC/1500vDC live
working.
• Ideal for use on hybrid and electric vehicles.
• Features an easy-to-read scale, has a range of 6-30Nm, and is
adjusted by a pull-out collar at the base of the handle in 0.1Nm
increments.
• A fully insulated click type torque wrench
• Ideal for use on hybrid and electric vehicles
• Safe operator use for live voltages up to 1000vAC/1500vDC
• It features an easy-to-read scale, has a range of 20-100Nm
• ⁄"D x 403mm long
• Supplied in a blow mould case for storage.
• A fully insulated click type torque wrench
• Ideal for use on hybrid and electric vehicles
• Manufactured to IEC60900 standard Safe operator use for live
voltages up to 1000V AC/1500V DC (VDE/IEC60900 approved).
• Range: 10 - 60Nm in 0.25Nm increments; tolerance ±4%.
• ⁄"D x 350mm long.
LASER
VDE INSULATED TORQUE
WRENCH ⁄"D 1060NM
PART NO: 8321
EV TOOLS
100
POWER TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
100
EV TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
GYS
SUPER PRO SMART
EV CHARGE
PART NO: GYS080676
LASER
INSULATED OPEN END SPANNER SET
18 PIECE
PART NO: 8558
LASER
INSULATED TOOL KIT ⁄"D
22 PIECE
PART NO: 6146
LASER
EXTRA LONG INSULATED HEX KEY SET
6 PIECE
PART NO: 5515
LASER
EXTRA LONG INSULATED STAR KEY SET
9 PIECE
PART NO: 5516
• A comprehensive set of fully
insulated open end spanners for
use on modern hybrid and electric
vehicles
• Sizes: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
17, 18, 19, 20, 21, 22, 23, 24mm.
• Safe operator use for live voltages
up to 1000V AC/1500V DC.
• VDE certified. IEC60900:2018
• Ideal for workshop mechanics
• Can be easily switched from one mains cable to another
depending on the nearest electrical outlet in the workshop.
• Significant time saving when recharging a vehicle, as it
charges very quickly from a 32A socket. - Simple set-up on
the intuitive interface, with digital display.
• Can be attached as a wall-mounted charging station if
connected to an outlet that is dedicated to EV charging.
• Ideal for an on-the-move user with an EV or Plug-in Hybrid -
£233
£24
£326
£690
£31
£198
£36
100 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
100 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
• Fully insulated tool set, for
live working up to 1000V
AC or 1500V DC
• Ideal for hybrid and EV
servicing and maintenance.
• Includes the most used
tools: ⁄""D ratchet, 15 x hex
sockets, extension bars,
pliers and screwdrivers.
• Insulated, single ended Hex keys 2.5mm to 8mm
• Sizes: 2.5, 3, 4, 5, 6 and 8mm.
• VDE approved hex key set for live working up to 1000V AC or
1500V DC.
• Supplied in a durable storage case.
• Extra long set of insulated Star keys
• VDE certified protection to IEC60900 standard, for live working up
to 1000V AC or 1500V DC.
• Sizes: T10, T15, T20, T25, T27, T30, T40, T45 and T50.
• Supplied in a durable storage case.
LASER
INSULATED SOCKET SET ⁄"D
24 PIECE
PART NO: 6147
LASER
INSULATED NUT DRIVER SET
7 PIECE
PART NO: 7482
• Fully insulated socket
set, for live working up to
1000V AC/1500V DC
• Includes a range of single
Hex (6pt) sockets and
accessories.
• 20 x ⁄""D sockets: 10, 11, 12,
13, 14, 15, 16, 17, 18, 19, 20,
• VDE Nut driver set manufactured from chrome vanadium, ideal for
buried wiring harness covers.
• Sizes: 6, 8, 10, 11, 12, 13 and 14mm; shaft length: 125mm
• Handle PP/TPR.
101
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 101
POWER TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 101
EV TOOLS
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT
WAI
R2000 EV EMERGENCY
BATTERY BOOSTER PACK
PART NO: R2000
WAI
R3000 EV EMERGENCY
BATTERY BOOSTER PACK
PART NO: R3000
NEW
NEW
• The modern-day petrol can for
the EV market
• 2.2kW Portable EV Charger
• Up to 8miles of top up charge
• 3kW Portable EV Charger
• Up to 10 miles emergency top up charge.
• Ideal for recovery of standard EV vehicles
£3,285 £2,688
£1,500
101
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 101
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT 101
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
LASER
WORKSHOP EV PACKAGE WITH MOBILE
SHADOW BOARD KIT
PART NO: 8294
• A complete package of
tools, PPE and safety
products for workshop
use, when servicing or
repairing high voltage
vehicles. Supplied on a
mobile shadow board
for ease of access and security
• An 88 piece package of all necessary safety requirements for
working on vehicle systems up to 1000v, stored conveniently
on a shadow board and mounted on a mobile trolley for ease of
LASER
INSULATED TOOL KIT ⁄"D
25 PIECE
PART NO: 6150
LASER
INSULATED STAR SCREWDRIVER SET
7 PIECE
PART NO: 7448
• Fully insulated tool set, for live
working up to 1000V AC or
1500V DC
• 9 x ⁄""D sockets: 7, 8, 10,
12, 14, 15, 17, 19 and 22mm.
Length: 71mm.
• Combination pliers 175mm;
side cutter 150mm; 3/8""D 72
teeth ratchet; extension bar
100mm; T-handle.
• Fully insulated tool set, for live working up to 1000V AC or 1500V DC
• 9 x ⁄""D sockets: 7, 8, 10, 12, 14, 15, 17, 19 and 22mm. Length: 71mm.
• Combination pliers 175mm; side cutter 150mm; ⁄""D 72 teeth ratchet; extension bar
100mm; T-handle.
• 6 x open end spanners: 7, 8, 10, 12, 14 and 17mm; also includes a cable knife.
• 4 x screwdrivers: Phillips: Ph1 x 100mm, Ph2 x 100mm; Flat: 5.5 x 125mm and 4 x
100mm.
• VDE/GS approved insulated tool kit. IEC60900 approved for 1000V safe working.
LASER
INSULATED STAR BIT SET ⁄"D
10 PIECE
PART NO: 8560
• A fully insulated set of ⁄""D
Star* bit sockets, complete
with T-handle driver
• For use on modern hybrid and
electric vehicles. IEC60900
certified for live working up to
1000V AC/ 1500V DC
• Includes sizes from T20
to T55, ideal for use by
electricians and auto
£24
£228
£113
102
EV TOOLS
FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
LASER
EV BATTERY LIFTING FRAME
FOR 4/6 POINT LIFTING SWL 700KG
PART NO: 8338
• A fully adjustable and universal EV battery lifting system, suitable
for all types of underslung/skateboard style of EV batteries
(max SWL: 700kg), suitable for both four and six point lifting
requirements
• Main lifting beam with moveable lifting eye, for use with workshop
lifting hoist/engine crane (1 tonne model required, Part No.8337)
• Three transverse beams, with adjustable lifting brackets (2x beams
for 4-point lifting, 3x beams for 6-point lifting)
• Six adjustable chain slings, plus 6 each of M12, M16 and M20
eyebolts for attachment to EV battery lifting points
102 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
LASER
ELECTRO-HYDRAULIC TABLE LIFT
• A mobile 230V electro-hydraulic table lift with an
adjustable, tilting, lifting platform which allows easy
access under the vehicle for disassembly and removal
of EV battery packs, engines and transmissions.
Fitted with a wooden composite table surface with
specially milled openings for easy battery fastener/EV
connection or transmission access
1 TONNE PART NO: 8524
£3,987
• Lift capacity: SWL 1 tonne
• Table dimensions: 1760 x 1130mm; adjustable working
height: 1100 – 2000mm
• Weight: 200kg
• Features: 4 steering wheels (2 braked), adjustable
tilting table top, double hydraulic cylinders, low friction
Polyethylene (PE) sliders, anti-crush stops to prevent
trapped hands, dead-man control and a 5m retracting
mains cable
1.4 TONNE PART NO: 8525
£4,785
• Lift capacity: SWL 1.4 tonnes
• Table dimensions: 1760 x 1130mm; adjustable working
height: 800 – 2000mm
• Weight: 200kg
• Features: 4 steerable wheels (2 braked), adjustable
tilting table top, double hydraulic cylinders, low friction
Polyethylene (PE) sliders, anti-crush stops to prevent
trapped hands, dead-man control and a 5m retracting
mains cable.
EV WORKSHOP
LASER
EV BATTERY ADJUSTABLE MOBILE
BENCH
SWL 800KG
PART NO: 8339
• Adjustable mobile bench, specifically designed to aid the removal
of underslung EV batteries (max Safe Working Load: 800kg) from
the vehicle and move them around the workshop for safe storage
and/or repair
• Mobile bench with individual height adjustable heavy-duty castors,
allows for height/tilt adjustment (70mm max) to ensure batteries
remain level and in alignment with the vehicle when either
removing or installing
FINANCE OPTIONS
AVAILABLE
FINANCE OPTIONS
AVAILABLE
£1,671 FINANCE OPTIONS
AVAILABLE
£1,795 FINANCE OPTIONS
AVAILABLE
103
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 103
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
Meeting the need for qualified staff in the
ever growing MOT sector
Premier MOT Training is the UK’s longest established independent Automotive
& MOT Training Provider, catering to 600 plus students every year.
Specialising in Automotive Training for the Automotive
Industry they cover a varied range of courses including
Level 3 accreditation for those without formal industry
qualifications, but with lots of experience; MOT Tester
Training Classes 1, 2, 4 & 7; Class 3 and 5 bolt on and
The Level 3 Managers qualification.
All our Trainers are qualified MOT Testers, qualified to
Master Tech Level, all qualified in teaching training who
have worked within the industry & colleges for many
years to gain their expert knowledge.
Being one of the very few training providers who deliver
the Award in MOT testing Classes 1 & 2 (motorbikes) at
both of our in Essex and Derbyshire training centres.
We have a great working relationship with the DVSA
and Awarding Bodies.
Donna Chapman, Managing Director, says “we have
looked at the sheer numbers of tests being carried
out and with over 9,000,000 tests being carried out
in the first quarter of 2022, it’s no wonder we’ve been
inundated with students wanting training of this type.”
Readers may be interested to know that there are over
20,000 stations in the UK and almost 60,000 testers, so
it’s no wonder the market demand is at its highest.
Donna continues “One of the biggest areas we have
noticed growth in is on Managers training.
With the recent DVSA changes a senior manager can
now become the AEDM but if it isn’t one of the Principles
(AEP) and AEP must also attend the course.
We have also noticed several existing AEDM’s returning
for an up skill to help with their stations compliance.
Many stations aren’t aware that site managers, even
though it is not a requirement, can sit the managers
course”. Premier MOT have increased their availability
of the Level 3 in MOT Centre Management courses to
ensure we can meet the demand.
Contact the team on 0121 749 8801 for more details
104 For orders and more information call 0121 749 8801 Mon - Fri 8.00am - 5.30pm
104 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
An e-learning platform that provides technicians with the ability to enhance
their skills and knowledge across a wide range of topics.
8 MAIN TRAINING COURSES:
• Hybrid & Electric Vehicles
• ADAS
• Exhaust & After treatment
• Petrol Systems
• Diesel Systems
• Chassis Systems
• Vehicle Electrics
• Other Systems
TRAINING
ACADEMY
FEATURES:
• 300+ individual training modules
• Extensive video content filmed in real world workshop environment
• Interactive text and questions
• Engine simulator
• Training Needs Analysis questionnaires
• Own training profile containing all certificates earned
• Mock tests for IMI accreditation
• Designed for all devices including tablets and mobiles
£220
12 Months access
Call for more information
105
**All prices are subject to change without prior notice due
to market fluctuation. **All Prices Excl VAT 105
**All prices are subject to change without prior notice due to
market fluctuation. **All Prices Excl VAT
Delphi Academy is a training platform developed by Delphi Technologies out of their state-of-the-art training facility
in Warwick. The platform provides automotive technicians with an enhanced learning experience, oering not only
face-to-face training but a wide range of training resources including (but not limited to) online videos, webinars,
interactive simulations and access to industry expert lead information.
Titan 10 - Warwick
Delphi’s Award-winning technical training centre directly incorporates Delphi's wealth of OEM technical expertise into
Delphi's training material, ensuring you get only the best quality technical training, every time.
Developed by technicians for technicians
Delphi's training is all based on real world experience and scenarios. Case studies have shown that continued learning
can also help automotive technicians stay motivated and engaged in their work. Learning new skills and techniques
can provide a sense of personal fulfilment and satisfaction, and it can help technicians feel more confident and
competent in their work.
COURSE CODE DESCRIPTION NO. OF DAYS PRICE
DELSTT Service technician - I.M.I. (Assessments only) 1£250
DELDTT Diagnostic technician - I.M.I. (Assessments only) 1£250
DELFRG F Gas Refridgerant Handling Qualification 1£250
DELHV4 Hybrid and Electric Vehicles L4 NEW 2£500
DELADS Advanced Driver Assistance systems 2£500
DELHV3 Hybrid and Electric Vehicles L3 NEW 2£540
DELHVH Hybrid and Electric Vehicle Hazards L2 2£440
DELFFT Fast fit Service Technician - I.M.I. (Assessments only) 1£275
DELMST Master Technician - I.M.I. (Assessments only) 1£275
DELBR1 Braking Fundamentals 1£225
DELSAS Steering and Suspension 1£225
DELWAT Wheels and Tyres 1£225
GEQDELEXH Exhaust Systems 1£225
DELVIO Vehicle Inspection overview 1£225
DELCST Customer Service Training (Technical Sta) 1£225
DELVE1 Vehicle Electrics 1 1£225
DELOS1 Oscilloscope Introduction 1£225
DELUE1 Understanding Emissions 1£225
DELGE1 Gasoline Engine Management 1 1£225
DELGE2 Gasoline Engine Management 2 1£225
DELCR1 CR Hydraulic Diagnosis 1£225
DELVE2 Vehicle Electrics 2 1£225
DELVE3 Vehicle Electrics 3 1£225
DELCR3 CR Advanced Diagnosis 1£225
DELGD1 Gasoline Direct Injection 1£225
DELOS2 Oscilloscope Advanced 1£225
DELTOD Turbo Operation & Diagnosis 1£225
DELEAT Exhaust After Treatment Operation & Diagnosis 1£225
DELDSU DS Diagnostic User 1£225
DELCRI Advanced Driver Assistance systems 2£450
DELHV2 Hybrid and Electric Vehicles L2 NEW 2£540
DELHV1 Hybrid and Electric Vehicles L1 NEW 1£440
106 For orders and more information call 0121 749 8801 Mon - Fri 8.00am - 5.30pm
106 FOR ORDERS AND MORE INFORMATION CALL 0121 749 8801 MON - FRI 8.00AM - 5.30PM
TRAINING SYLLABUS 2024
● Updates to testing standards since 20th May 2020
● Using the MOT testing service to check you’re carrying out tests correctly
● Updating your user profile details on the MOT testing service
● Vehicle identification
● Tyres, lighting, brakes and suspension.
● The driver’s view of the road
● The introduction section of the MOT inspection manual
● CPD courses run from 31st March 2023 to 31st March 2024.
DVSA MOT CHANGES
The DVSA have changed how existing MOT testers maintain their authorised status.
● All MOT testers are now required to:
● Complete 3 hours annual training
● Pass an Annual assessment
● Provide proof of training and assessment completion to DVSA
IMI CAN HELP EXISTING MOT TESTERS
IMI have created cost eective, flexible and time-saving packages, to meet all DVSA MOT
Testers requirements:
● All MOT testers are now required to complete MOT annual training and annual assessment
MOTORCYCLE & CAR MODULE Delivered by the IMI
● E-Learning module
● Assessment module
CALL FOR
LATEST PRICE
CPD M.O.T.
Email: garage.equipment@gsfgroup.com PART NO: GEQCPDMOT
MOT TESTER
Annual Training & Assessment
2024
Contact your local GSF branch for more information
Features & Benefits
✓ Mobile friendly, use anywhere,
any time
✓ Over 25 points of vehicle
info available
✓ User-Friendly, Responsive
Interface
✓ Stock status/timescale displayed
✓ Instant orders, no call waiting
✓ Instant control over delivery
expectation
✓ Notifications when stock
dispatched
✓ View / download previous
order history & invoices
✓ Feedback System
Direct URL:
https://app.gsfappsuite.com/
Android QR Apple QR
GSF APP
Service &
Brake Kits.
Select all items
needed with ease
& eciency.
See parts availability
at your local branch
VRM part look-up for
accurate ordering
Order your required
parts online
Access to our online
catalogue
✓
Consumables
Terms & Conditions
• Prices shown are for Trade Customers only. • Prices exclude VAT at current rate. • Prices correct at time of going to press March 2024. • Oer ends 30th September 2024. • Prices subject to change
without notice. • Promotional items subject to availability. • Errors & Omissions excluded. • In all cases please contact local branch for full application/ fitment details. • Images shown are for illustration
purposes only, and may or may not reflect the actual products. • Lease terms & conditions available FOC upon request. • All oers UK mainland only. • Specifications subject to change without notice.
• Lease figures may vary according to status. • Non home owners & non established businesses may attract a higher rate. • All lease transactions are subject to a documentation fee.
COMGSF013B
NEW
Lots of new products inside
